Bioderived Ionic Liquids with Alkaline Metal Ions for Transient Ionics Reviewed

Yamada S.

Small   19 ( 36 )   2023.09

Nanoporous Cu Prepared through Dealloying by Selectively Etching an Alkaline Metal with Saline Reviewed

Yamada S.

ACS Applied Nano Materials   6 ( 9 )   7229 - 7233   2023.05

A normally off time-of-event logging system triggered by a battery-less sensor Reviewed

Yamada S., Toshiyoshi H.

Sensors and Actuators A: Physical   354   2023.05

A Transient Pseudo-Capacitor Using a Bioderived Ionic Liquid with Na Ions Reviewed

Yamada S.

Small   19 ( 15 )   2023.04

Moving coil type electromagnetic microactuator using metal/silicon driving springs and parylene connecting beams for pure in-plane large motion in three axes Reviewed

Wang H., Yamada S., Tanaka S.

Sensors and Actuators A: Physical   342   2022.08

Three-Degree-of-Freedom Electromagnetic Microactuator With Powder-Based Sm-Fe-N Magnets and Parylene Beams Reviewed

Wang H., Yamada S., Matsuura M., Sugimoto S., Tanaka S.

Journal of Microelectromechanical Systems   31 ( 4 )   634 - 643   2022.08

A Transient Supercapacitor with a Water-Dissolvable Ionic Gel for Sustainable Electronics Reviewed

Yamada S.

ACS Applied Materials and Interfaces   14 ( 23 )   26595 - 26603   2022.06

Laminated wafer with conductive diamond layer formed by surface-Activated bonding at room temperature for micro-electro mechanical system sensors Reviewed

Koga Y., Yamada S., Tanaka S., Kurita K.

Japanese Journal of Applied Physics   61 ( SF )   2022.06

Three Axis Actuation of Moving Coil Type Electromagnetic MEMS Actuator for Optical Image Stabilization Reviewed

Wang H., Yamada S., Tanaka S.

Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)   2022-January   580 - 583   2022.01

Temperature stable rare earth magnetic powder Sm-Fe-N based micro magnets with remanence enhanced by easy axis alignment and its application in MEMS actuator Reviewed

Wang H., Matsuura M., Yamada S., Sugimoto S., Tanaka S.

Journal of Micromechanics and Microengineering   31 ( 7 )   2021.07

Temperature Sensor with a Water-Dissolvable Ionic Gel for Ionic Skin Reviewed

Yamada S., Toshiyoshi H.

ACS Applied Materials and Interfaces   12 ( 32 )   36449 - 36457   2020.08

Investigation of shear stress between roll interfaces in a high-accuracy roll-type stamping transfer system Reviewed

Tokonami M., Yamada S., Kashiwagi M., Iwase E.

IEEJ Transactions on Sensors and Micromachines   140 ( 4 )   79 - 83   2020.01

Event Driven Time-logging System based on Continuous Operation of Real Time Clock towards Perpetual Electronics Reviewed

Yamada S., Toshiyoshi H.

Journal of Physics: Conference Series   1407 ( 1 )   2019.12

Enhancement of electrostatic induction current of energy harvester by using a gelatinized ionic liquid Reviewed

Yamada S., Mitsuya H., Ono S., Toshiyoshi H., Fujita H.

IEEJ Transactions on Sensors and Micromachines   139 ( 1 )   7 - 14   2019.01

A Water Dissolvable Electrolyte with an Ionic Liquid for Eco-Friendly Electronics Reviewed

Yamada S., Toshiyoshi H.

Small   14 ( 32 )   2018.08

An Autonomous Power Management System with Event-driven Energy Harvester Switch Reviewed

Yamada S., Toshiyoshi H.

Journal of Physics: Conference Series   1052 ( 1 )   2018.07

Temperature-Compensated Pure Silicon Cantilever Resonator with Coupled Torsional Structure at Anchor Reviewed

Yamada S., Tanaka S.

2023 22nd International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2023   1817 - 1820   2023.01

シリコン熱電素子を用いたIoT向け環境調和型電源の開発

Grant number：19K23523  2019.08 - 2021.03   研究活動スタート支援

応用物理学会　若手チャプター   副会長  

2020.04