Faculty Profiles - YAMAGUCHI Tomiko

Papers - YAMAGUCHI Tomiko

Division display1 - 20 of about 288／ All the affair displays >>

Rapid electrical-current-activated sintering achieves robust cladding with uniform nanocrystalline grains Reviewed International journal

Zhao D., Wang Y., Chen H., Liu Y., Zhang J., Ma L., Yang C., Cui Y., Wang M., Geng J., Kong D., Zhang X., Guo Y., Tang Z., Dan C., Man C., Chen Z., Wang H., Yamaguchi T., Ma E.

Materials Today 85 17 - 26 2025.06

The feasibility of resistance seam welding as an additive manufacturing technology for Al 1060 Reviewed

Wang W., Lai H., Wang F., Wang D., Li Y., Li S., Luo D., Yamaguchi T.

Journal of Materials Research and Technology 30 6609 - 6618 2024.05

Crack reduction in electron beam cladding of AlCoCrFeNiCu high entropy alloy coatings by resistance seam welding pre-alloying Reviewed

Wang W., Zhang T., Wang D., Li Y., Li S., Wu D., Yamaguchi T.

Surface and Coatings Technology 479 2024.03

Optimized wear behaviors and related wear mechanisms of medium entropy alloy-based composite coatings Reviewed International journal

Ma L., Zhao D., Wang Y., Wang K., Huang J., Jin X., Kong D., Wang M., Yamaguchi T., Wang H.

Journal of Materials Research and Technology 29 12 - 27 2024.03

Effects of bonding conditions on the preparation of SUS430/A6061 clad material by Vacuum Rolled Bonding Process

Umei Daigo, Yamaguchi Tomiko

Preprints of the National Meeting of JWS ( JAPAN WELDING SOCIETY ) 2024f ( 0 ) 384 - 385 2024.01

Surface Modification of Chrome Molybdenum Steel by Fiber Laser

KOBAYASHI Ryota, Yamaguchi Tomiko

Preprints of the National Meeting of JWS ( JAPAN WELDING SOCIETY ) 2024f ( 0 ) 214 - 215 2024.01

Microstructure and wear resistance of in-situ synthesized stellate Mo<inf>2</inf>C reinforced WC/amorphous composite coatings by resistance seam welding (RSW) Reviewed International journal

Wang W., Cai Z., Li S., Wang D., Li Y., Luo D., Wu D., Fan X., Yamaguchi T.

Tribology International 186 2023.08

Effect of WC-10Co on microstructure and properties of medium-entropy alloy coatings via electron beam cladding Reviewed International journal

Wang W., Fan X., Li Y., Li S., Wang D., Zhang H., Yamaguchi T.

Journal of Alloys and Compounds 926 2022.12

Characterization and Wear Behavior of CoCrNi Medium Entropy Alloy Coating on Al Alloy by Resistance Seam Processing Reviewed International journal

Dechao Zhao, Decheng Kong, Jie Huang, Mingliang Wang, Tomiko Yamaguchi

MATERIALS TRANSACTIONS ( The Japan Institute of Metals and Materials ) 63 ( 4 ) 649 - 654 2022.04

Authorship：Last author Language：English Publishing type：Research paper (scientific journal)

<p>In this study, the CoCrNi medium entropy alloy (MEA) coating was firstly fabricated on 5083Al alloy by the resistance seam processing (RESP) method. After processing, the CoCrNi MEA powders were transformed into a simple face-centered cubic (FCC) structural coating with an average thickness of 381 ± 4 µm, and the heat-affected zone was rarely found in the Al alloy matrix. Furthermore, a certain amount of Al element penetrated into gaps of coating and Co, Cr and Ni elements were homogeneously distributed. The average hardness of the coating was 775 ± 68 HV<sub>0.2</sub>, which was higher than the similar MEAs prepared by other reported methods. To evaluate its wear properties, the wear behaviors of CoCrNi MEA coating and 5083Al alloy were studied in detail. Although the main wear mechanisms of both materials were adhesive wear, the high hardness and plastic deformation ability of the MEA coating effectively improved its wear performance. Practically, the average wear rate was ∼10 times lower than 5083Al alloy. The RESP method was proved to be an effective method for preparing the high wear-resistance MEA coating on Al alloy.</p>

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85149393855&origin=inward

High-temperature oxidation performance of laser-cladded amorphous TiNiSiCrCoAl high-entropy alloy coating on Ti-6Al-4V surface Reviewed International journal

Shen Li , Tomiko Yamaguchi

Surface and Coatings Technology 433 2022.03

Achieving the lightweight wear-resistant TiC reinforced AlFeCrCo medium-entropy alloy coating on Mg alloy via resistance seam processing Reviewed International journal

Dechao Zhao a b , Decheng Kong c, Jie Huang a b , Mingliang Wang a , Tomiko Yamaguchi d , Haowei Wang

Scripta Materialia 210 2022.03

High-temperature oxidation behavior of laser-cladded refractory NiSi0.5CrCoMoNb0.75 high-entropy coating Reviewed International journal

Shen Li , Tomiko Yamaguchi

Journal of Materials Research and Technology 17 1616 - 1627 2022.03

Microstructure characterization and wear performance of WC-10Co/Ti-6Al-4V coating fabricated via electron beam cladding Reviewed International journal

Yawei Chen, De Wang, Wenqin Wang, Yong Liu, Yutaka S. Sato, Tomiko Yamaguchi, Yunxia Chen, Chenghai Wang

Surface and Coatings Technology 422 2021.09

Microstructure and high-temperature properties of laser cladded AlCoCrFeNiTi0.5 high-entropy coating on Ti 6Al-4V alloy Reviewed

Xian Zeng, Ziyong Liu, Ganggang Wu, Xu Tong, Yaqiong Xiong,Xudong Cheng, Xuanguo Wang, Tomiko Yamaguchi

Surface and Coatings Technology 418 2021.07

Preparation of high performance Fe-based amorphous coating by resistance seam welding Reviewed

Changgui Pan, Rui Zhang, De Wang, Yulong Li, Tomiko Yamaguchi, Xiaofei Fan, Dechao Zhao, Wenqin Wang

Surface and Coatings Technology 408 2021.02

Swirl-like Cu-Sn phase formation and the effects on the ultrasonic spot welded joint of Sn-coated Cu plates Reviewed

Yulong Li, Zhenghui Chu, Xuewen Li, Yunlong Pan, Tomiko Yamaguchi, Wenqin Wang

Journal of Materials Processing Technology 288 2021.02

Effect of flow of nitrogen side-feed on microstructure and crystal orientation in laser melting nitridation Reviewed International journal

Li S., Yamaguchi T., Danjo T., Hashimoto S.

Results in Optics 1 2020.11

レーザ照射による低炭素鋼および鋳物の部分硬化技術の開発 Invited Reviewed

山口富子,毛利陽一、北川善大

レーザ加工学会誌 ( レーザ加工学会 ) 27 ( 3 ) 44 - 45 2020.10

レーザによる表面改質 Invited Reviewed

山口富子

砥粒加工学会誌 ( 砥粒加工学会 ) 64 ( 8 ) 415 - 418 2020.08

Fabrication and friction properties of the AlFeCrCo medium-entropy alloy coatings on magnesium alloy Reviewed

Dechao Zhao, Tomiko Yamaguchi, Danjo Tusbasa, Wenqin Wang

Materials and Design 193 2020.08

　PREV- NEXT 　

<YAMAGUCHI Tomiko>

Papers - YAMAGUCHI Tomiko