Faculty Profiles - KIKKAWA Koichi

Papers - KIKKAWA Koichi

Division display >> ／ All the affair displays1 - 61 of about 61

Geometric Analysis of the Generating Mechanism for Machined Surfaces in Radius End Milling—Calculation Method for the Shape of Machined Surfaces and Its Dependence on the Tool Axis Direction — Reviewed

Koichi KIKKAWA

Journal of the Japan Society for Precision Engineering ( Japan Society for Precision Engineering ) 91 ( 7 ) 2025.07

Authorship：Lead author,　Corresponding author Language：Japanese Publishing type：Research paper (scientific journal)

This study aims to geometrically analyze the generating mechanism of machined surfaces in radius end milling. In
this report, to clarify the dependence of the machined surface shape on the tool axis direction, we propose an iterative
calculation method to determine parameter values using approximate ruled surfaces and the internal division ratio of
sections including their endpoints. By applying this method to calculate the machined surface shape for 792 combinations
of tool axis direction, it was found that the maximum Rz of 21.0 µm occurred at a slant angle of 55 ◦ and a bearing angle
of 270 ◦ . In contrast, the minimum Rz of 6.4 µm occurred at a slant angle of 5 ◦ and a bearing angle of 60 ◦ .

Reduction of Tightening Torque for Miniature Screw Threads by Ultrasonic Excitation Reviewed

Koichi Kikkawa, Masataka Ezaki and Yoshio Mizugaki

Proceedings of 15th International Conference on Precision Engineering (ICPE2014) 1 ( 1 ) 888 - 891 2014.07

Dependency of Working Accuracy on Location of Truncated Conical Workpiece Machined by 5-axis Controlled Machine Tool with Geometric Error Reviewed

Koichi KIKKAWA, Masaki HIROSAWA, Hidekazu KIKUCHI, Yoshio MIZUGAKI, Hisanobu TERAI

Proc. of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2011) 1 - 4 Nr. 3362 (CD-ROM) 2011.11

Effects of position and orientation errors of linear and rotary axis average lines of five-axis controlled machining centre onto its motion errors in testing method with truncated square pyramid Reviewed

Kikkawa K., Mori N., Mizugaki Y., Ozaki K.

JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020 2020.01

Tightening Method of Miniature Screw Threads with Ultrasonic Vibration:- Effect of Amplitude of 60 kHz Longitudinal Vibration -

KIKKAWA Koichi, MORI Naoki, MIZUGAKIKIKAI Yoshio

The Proceedings of The Manufacturing & Machine Tool Conference ( The Japan Society of Mechanical Engineers ) 2019 ( 0 ) C01 2019.01

Authorship：Lead author Language：Japanese Publishing type：Research paper (other academic)

This paper describes the effect of amplitude of longitudinal ultrasonic vibration on tightening miniature screw threads in terms of tightening torque, bearing surface friction torque and thread torque. Miniature screw threads of S1.4 are tightened with the ultrasonic vibration of 4 different amplitudes of 60 kHz longitudinal vibration. The experimental results indicate that the amplitude of 2.6μm reduces the tightening torque by 25%. In the case of the amplitude of 1.8μm, the largest depression of the contact surface of specimen was formed. These experimental results suggest that the amplitude of vibration should be optimized.

DOI： 10.1299/jsmemmt.2019.13.C01

CiNii Article

CiNii Research

Other Link： https://ci.nii.ac.jp/naid/130007836371

Geometric Analysis of Machining Error with Tool Orientation in Ball End Milling Reviewed

TERAI Hisanobu, ASAO Teruyuki, KIKKAWA Koichi, MIZUGAKI Yoshio

LEM21 2017 ( 0 ) 2018.05

Geometric analysis of machining error with tool orientation in ball end milling Reviewed

2017.11

A proposition for machining error estimation based on geometric analysis of ball end milling Reviewed

TERAI Hisanobu, ASAO Teruyuki, KIKKAWA Koichi, MIZUGAKI Yoshio

Transactions of the JSME (in Japanese) 2017.01

Experimental Verification of Discrepancy on Directions of Chip Flow and Resultant Cutting Resistance in Oblique Cutting Reviewed

Yoshio Mizugaki, Koichi Kikkawa, Daiki Kakubo, Shunsuke Baba and Tatsuki Ichinose

Proceedings of 15th International Conference on Precision Engineering (ICPE2014) 1 ( 1 ) 563 - 566 2014.07

Experimental Study of Cutting Performance and Tool Wear in Dry Side Milling of Aluminum Alloy with DLC-coated HSS-Co Cutter Reviewed

Yoshio Mizugaki, Kazuki Takafuji, Koichi Kikkawa, Teppei Kuroda, and Taro Kimura

Proceedings of 14th International Conference on Precision Engineering (ICPE2012) 1 ( 1 ) 1 - 6 2012.11

Proposition of evaluation index based on geometric analysis for precise machining of ball end milling Reviewed

2011.12

Dependency of working accuracy on location of truncated conical workpiece machined by 5-axis controlled machine tool with geometric error Reviewed

2011.12

Experimental study on surface texture and coefficient of friction in sliding friction test Reviewed

Yoshio MIZUGAKI,Koichi KIKKAWA,Wataru Nakashima,Minghui HAO

Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology 1 ( 1 ) 2011.05

Research about Elastic Mechanism of Error Generation in Ball End Milling based in Geometric Analysis Reviewed

Hisanobu Terai,Teruyuki Asao,Koichi Kikkawa,Yoshio Mizugaki

Proc. ESAFORM 2011 1 ( 1 ) 2011.04

Experimental Research into Elastic Deformation of Tool on Machining Accuracy in Ball End Milling Reviewed

Hisanobu Terai,Teruyuki Asao,Koichi KIKKAWA,Yoshio Mizugaki

Proceedings of 6th International COnference on MicroManufacturing (ICOMM 2011) 1 ( 1 ) 2011.03

Enhancement of Material Removal Rate by Flushing Dielectric Working Fluid in Scooping EDM Reviewed

Yoshio MIZUGAKI,Masayuki KAKEHASHI,Koichi KIKKAWA

Proceedings of 6th International COnference on MicroManufacturing (ICOMM 2011) 1 ( 1 ) 2011.03

Experimental study on surface texture and coefficient of friction in sliding friction test Reviewed

2 378 - 381 2011.01

Vibration Effect on Tightening Miniature Screw Threads Reviewed

Yoshio MIZUGAKI,Kenta TAKAKI,Masataka EZAKI,Koichi KIKKAWA,Kazuki TAKAFUJI

Proceedings of the 14th International Conference on Mechatronics Technology 1 ( 1 ) 67 - 70 2010.11

Experimental Study of Friction Ratio On Lubricating Characteristics of Micro Bubble Added Working Fluid Due to Additive Gases in Rubbing Test Reviewed

Yoshio MIZUGAKI,Naofumi MITANI,Koichi KIKKAWA

Proceedings of 5th International Conference on Leading Edge Manufacturing in 21st Century 2009.12

Experimental Study on Effects of Micro Powder Added Dielectric WorkingFluid in Die-sinking EDM Reviewed

Yoshio MIZUGAKI,Ryosuke KII,Masataka EZAKI,Koichi KIKKAWA

Proceedings of the 3rd International Conference on Asian Society for Precision and Nanotechnology CD-ROM 2009.11

Simplified Estimation Method of Cutting Force Based on Geometric Prediction of Chip Flow Direction in Ball End Milling Reviewed

Y. Mizugaki,K. Kikkawa,K. Murakami,H. Terai

Proceedings of the 12th CIRP Conference on Modelling of Machining Operations 1 457 - 464 2009.05

Experimental Research into Geometrical Influence of Tool Orientation on Machining Accuracy in Ball End Milling Reviewed

H. Terai,T. Asao,K. Kikkawa,Y. Mizugaki

Proceedings of the 12th CIRP Conference on Modelling of Machining Operations 1 505 - 510 2009.05

Experimental Characteristics of Aluminum alloys in Dry End Milling Reviewed

Yoshio Mizugaki,Kazuki Takafuji,Koichi Kikkawa

Key Engineering Materials (Issue on Progress of Machining Technology) 407-408 714 - 717 2009.04

A Polishing System assisted by Ultrasonic Vibration Suppresses Loading of Felt-buff Reviewed

Masahiko MIZUI,Yoshio MIZUGAKI,Koichi KIKKAWA,Keisuke KAMIJO

Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century 1 ( 1 ) 95 - 98 2007.11

Efficient Combination of Tool Orientations and Cutter Overhung Lengths in Roughing End Milling Reviewed

Yoshio Mizugaki,Koichi Kikkawa,Keisuke Kunihiro

Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations 1 ( B10 ) 1 - 6 2007.08

Tightening Torque Characteristics of Miniature Screw Threads Based on Internal Driving Features Reviewed

Yoshio MIZUGAKI,Koichi KIKKAWA,Daisuke FUJITAKE,Shinya MATSUBARA,Takeshi KOTAKE

Proc. 2nd Asia International Symposium on Mechatronics 2006 1 ( F1-01 ) 1 - 4 2006.12

Experimental Study on Machining Characteristics due to Tool Path Patterns in Small-sized Ball End Milling Reviewed

Osamu INTOU,Koichi KIKKAWA,Yoshio MIZUGAKI

Proc. of JSME the Third Int'l Conf. on Leading Edge Manufacturing in 21st Century 1 1105 - 1108 2005.10

Relationship of Tool Orientation and Machining Accuracy on Ball-nosed End Milling Reviewed

H.Terai,T.Asao,K.Kikkawa,Y.MIZUGAKI

Proc. of JSME the Third Int'l Conf. on Leading Edge Manufacturing in 21st Century 151 - 156 2005.10

Geometric Analysis of Undeformed Chip Thickness in Ball-nosed End Milling Reviewed

TERAI Hisanobu,HAO Minghui,KIKKAWA Koichi,MIZUGAKI Yoshio

JSME International Journal, Series C 47 ( 1 ) 2 - 7 2004.03

Geometric Simulation of Electrode Wear Based on Volumetric Relative Wear in Generating EDM Reviewed

K. KIKKAWA,T. OGATA,Y. MIZUGAKI

Proc. the Second Int'l Conf. on Leading Edge Manufacturing in the 21st Century (LEM21) 955 - 958 2003.11

Geometric Analysis of Undeformed Chip Thickness in Ball-nosed End Milling Reviewed

H. TARAI,M. HAO,K. KIKKAWA,Y. MIZUGAKI

Proc. the Second Int'l Conf. on Leading Edge Manufacturing in the 21st Century (LEM21) 771 - 776 2003.11

An Approach of Estimating Machining Error by Heuristic Geometrical Rule in 5-axis Ball-nosed End Milling Reviewed

K. KIKKAWA,K. NAKAMURA,Y. MIZUGAKI

Proc. the Second Int'l Conf. on Leading Edge Manufacturing in the 21st Century (LEM21) 415 - 420 2003.11

Determination of Intermittent Tool Orientation Series based on Genetic Algorithm for Simplified Multi-axes End Milling Reviewed

Y.MIZUGAKI,K. KIKKAWA,K. SHICHIJYO,K. FUKUDA

Proc. 6th Japan-France and 4th Asia-Europe Congress on Mechatronics 254 - 259 2003.09

ボールエンドミル加工の幾何的切削機構解析に基づく加工面生成に関する考察 Reviewed

寺井久宣,HAO Minghui,吉川浩一,水垣善夫

日本機械学会論文集C編 69 ( 684 ) 222 - 227 2003.08

Theoretical Estimation of Machined Surface Profile Based on Cutting Edge Movement and Tool Orientation in Ball-nosed End Milling Reviewed

Yoshio MIZUGAKI,Koichi KIKKAWA,Hisanobu TERAI,Minghui HAO

Annals of CIRP 52 ( 1 ) 49 - 52 2003.08

球面のボールエンドミル加工における加工創成面の理論解析（第３報）-加工面形状の工具姿勢角依存症- Reviewed

吉川浩一,水垣善夫,HAO Minghui,寺井久宣

精密工学会誌 69 ( 3 ) 407 - 411 2003.03

CAI System with Multi-Media Text through Web Browser for NC Lathe Programming Reviewed

Yoshio MIZUGAKI,Koichi KIKKAWA,Masahiko MIZUI,Keisuke KAMIJO

Proc. 5th International Conference on Design of Information Infrastructure Systems for Manufacturing 2002(DIISM 2002) 75 - 82 2002.11

簡易多軸加工のための割出し角度の算出法

吉川浩一,七條数基,水垣善夫

型技術ワークショップ2002 in 北九州講演論文集 69 - 70 2002.11

Geometric Simulation of Roughing based on Intermittent Tool Orientation Series in Simplified Multi-Axes End Milling Reviewed

Yoshio MIZUGAKI,Koichi KIKKAWA,Koichi FUKUDA

Proc. 6th Int'l Conf. On Mechatronics Technology 224 - 229 2002.10

Geometric Analysis of Undeformed Chip Thickness for Ball-nosed End Milling Reviewed

Hisanobu TERAI,Koichi KIKKAWA,Yoshio MIZUGAKI

Proc. 6th Int'l Conf. On Mechatronics Technology 248 - 253 2002.10

ボールエンドミル加工における工具回転中心近傍の切削機構に関する幾何的考察 Reviewed

寺井久宣,HAO Minghui,吉川浩一,水垣善夫

日本機械学会論文集Ｃ編 68 ( 672 ) 241 - 247 2002.08

Development of Test Bed for Distributed Manufacturing System Connected by The Internet Reviewed

K. KIKKAWA,H. TERAI,Y. MIZUGAKI

Proc. of 5th France-Japan Congress on Mechatronics 501 - 505 2001.10

Command-based Compensation of Probing Motion for 3D Coordinate Measuring Machine Reviewed

K. KIKKAWA,K. FUKUDA,Y. MIZUGAKI

Proc. of 5th France-Japan Congress on Mechatronics 515 - 518 2001.10

Geometric Generating Mechanism of Machined Surface by Ball-Nosed End Milling Reviewed

Yoshio MIZUGAKI,Minghui HAO,Koichi KIKKAWA

Annals of the CIRP 50 ( 1 ) 69 - 72 2001.08

専門科目における半期集中講座への取り組みと課題-北九州高専・制御情報工学科での実践例- Reviewed

寺井久宣,久池井茂,吉川浩一,佐藤正視,宮浦すが,樫村秀男,脇山正博,山内幸治,安信強,田上宗男,乙部由美子

国立高等専門学校協会論文集「高専教育」 ( 24 ) 301 - 306 2001.03

講義と実習を連携させた授業への取り組みと課題-ディジタル回路技術教育における実践例- Reviewed

乙部由美子,脇山正博,山内幸治,寺井久宣,安信強,久池井茂,田上宗男,島津公紀,吉川浩一

国立高等専門学校協会論文集「高専教育」 ( 24 ) 307 - 312 2001.03

センサ工学における教育方法改善への試み Reviewed

安信強,田上宗男,島津公紀,寺井久宣,脇山正博,山内幸治,久池井茂,乙部由美子,吉川浩一

国立高等専門学校協会論文集「高専教育」 ( 24 ) 313 - 318 2001.03

多軸ボールエンドミル加工における切取り厚さの理論解析 Reviewed

寺井久宣,Hao　Minghui,吉川浩一,水垣善夫

日本機械学会論文集C編 67 ( 654 ) 553 - 558 2001.02

Expanding Development of End-Milling Tool Path Through Geometric Simulation Reviewed

Y. MIZUGAKI,K. TOYAMA,K. KIKKAWA,M. HAO

Proc. Int'l European Simulation Multi-Conference 263 - 267 2000.05

LMIを用いた倒立振子のロバスト制御

宮浦すが,尾形大介,久池井茂,吉川浩一

北九州工業高等専門学校研究報告 ( 33 ) 71 - 74 2000.01

遺伝アルゴリズムを用いた時間割作成システムの開発

吉川　浩一

北九州工業高等専門学校研究報告 ( 33 ) 75 - 80 2000.01

曲面を含む立体紙模型の平面展開

吉川　浩一

北九州工業高等専門学校研究報告 ( 32 ) 93 - 98 1999.01

Design of Supporting Structure based on Geometric Estimation of Shrinkage for Stereolithography Reviewed

Koichi Kikkawa,Yoshio Mizugaki

Proceedings of the 4th Japan-France Congress & 2nd Europe-Asia Congress on Mechatronics 2 805 - 810 1998.10

Solving regional constraints in components layout design based on geometric gadgets Reviewed

H. Suzuki,T. Ito,H. Ando,K. Kikkawa,F. Kimura

Artificial Intelligence for Engineering Design, Analysis and Manufacturing 11 ( 4 ) 343 - 353 1997.09

遺伝的アルゴリズムを用いた工具経路生成法の一手法 Reviewed

HAO Minghu,水垣善夫,吉川浩一

日本機械学会論文集C編 63 ( 608 ) 347 - 352 1997.04

Generation Method of Supporting Structure for Stereolithography Reviewed

Koichi Kikkawa,Hiromasa Suzuki,Yoshio Mizugaki,Fumihiko Kimura

Proceedings of 3rd Japan-France/1st Europe-Asia Congress on Mechatronics 2 722 - 727 1996.10

Automatic Determination of Measured Points on a Free-form Surface for a Coordinate Measuring Machine Reviewed

Yoshio Mizugaki,Minghui Hao,Koichi Kikkawa

Proc. of the 3rd Japan-France/1st Europe-Asia Congress on Mechatronics 2 691 - 696 1996.10

The Representation of the Assembly Feature for Moving Parts Reviewed

Koichi Kikkawa,Yoshio Mizugaki

Proceedings of ASME International Japan-U. S. A. Symposium on Flexible Automation 2 757 - 760 1996.07

Extraction of Simultaneous Assembly Sequence Based on Assembly Features Reviewed

Koichi Kikkawa,Yoshio Mizugaki,Minghui Hao

Proceedings of 28th CIRP International Seminar on Manufacturing Systems 119 - 123 1996.05

A Product Modeling System for Top-down Design of Machine Assembly with Kinematic Motion Reviewed

Koichi Kikkawa,Hiromasa Suzuki,Hidetoshi Ando,Fumihiko Kimura

Robotics & Computer-Integrated Manufacturing 10 ( 1/2 ) 49 - 55 1993.04

スケルトンによる干渉回避形状の生成

吉川浩一,鈴木宏正,木村文彦

東京大学工学部紀要 A-31 36 - 37 1993.03

　PREV-NEXT　

<KIKKAWA Koichi>

Papers - KIKKAWA Koichi