Faculty Profiles - YANG Shiyuan

Papers - YANG Shiyuan

Division display >> ／ All the affair displays1 - 132 of about 132

Image sensor based LED light marker with pulse modulation using under sampling Reviewed International journal

Kai Nakano, Shiyuan Yang, Seiichi Serikawa

Proceedings Volume 12771, Advanced Sensor Systems and Applications XIII ( SPIE ) 12771 ( 1277112 ) 1 - 6 2023.11

Obstacle Detection Surrounding a Moving Object with Fisheye Camera and Circle Line Laser Light Reviewed International journal

Yang S., Matsuo R., Serikawa S.

ACM International Conference Proceeding Series 54 - 59 2022.05

A Method for Detection of Obstacle Using Line Laser and Camera Reviewed

Miki Suetsugu, Kanako Kinoshita, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 7th IIAE International Conference on Industrial Application Engineering 2019 (ICIAE2019) ( The Institute of Industrial Applications Engineers ) 275 - 278 2019.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州市 2019.03.26 - 2019.03.30

This study proposes an obstacle detection method using a line laser and a camera. We showed it can detect obstacles over a wide range and it can calculate the width of obstacles with simple calculation.

DOI： 10.12792/iciae2019.054

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2019/paper/viewFile/2110/1349

Indoor Location Estimation Using Three Photodiodes and Ceiling LED Lights Reviewed

Kanako Kinoshita, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 7th IIAE International Conference on Intelligent Systems and Image Processing 2019 ( The Institute of Industrial Applications Engineers ) 173 - 177 2019.09

Language：English Publishing type：Research paper (international conference proceedings)

Taiwan, China Taipei 2019.09.05 - 2019.09.09

In this paper, we propose a method using LED lighting so that self-location can be estimated in various places. The experiment used 3 photodiodes and 2 LED lights modulated. Some experimental results showed it is a useful for indoor position detection.

DOI： 10.12792/icisip2019.032

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2019/paper/viewFile/2265/1414

Proposal of a Method for Obstacle Detection by the Use of Camera and Line Laser Reviewed International journal

Miki Suetsugu, Kanako Kinoshita, Akihiro Ito, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 7th ACIS International Conference on Applied Computing & Information Technology (ACIT 2019) 161 - 166 2019.05

Language：English Publishing type：Research paper (international conference proceedings)

USA Honolulu, Hawaii 2019.05.29 - 2019.05.31

This study proposes a method to detect obstacles over a wide range. It can calculate the width of obstacles with simple calculation and it has the advantages in comparison with the conventional method.

DOI： 10.1145/3325291.3325384

Distinguish of LED Light Marker with Frequency Modulation Using Under Sampling Reviewed International journal

Kai Nakano, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 10th International Conference on Intelligent Systems and Image Processing 2023 ( The Institute of Industrial Applications Engineers ) 235 - 239 2023.09

A Method for Identification of Door Type in an Image by Convolutional Neural Network Reviewed International journal

Shunpei Chochi, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 157 - 160 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

Care robots are becoming more and more important. There are various doors and doorways in homes, but it is difficult for a robot to move through them. Therefore, as a preliminary step in developing an autonomous mobile robot that can open and close any door, this paper aims to identify doorknobs and handles in images using machine learning. Houses have various types of doors and doorknobs. In this study, they are classified into 6 patterns. We use a Convolutional Neural Network (CNN) to classify them from images. We trained six typical doorknob patterns, 800 images were prepared for each pattern. As the result, the recognition accuracy improved to 79.9% compared to a conventional method. In future, in order for a robot to open and close any door, it will be necessary to detect 3D position of door.

DOI： 10.12792/iciae2023.029

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2809/1839

Position Detection Method Using Three Fisheye Cameras Arranged in Tandem Reviewed International journal

Yuto Watanabe, Keita Fukushima, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 348 - 354 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

In recent years, Japan's declining birthrate and aging population have made a decrease in the working population a problem. Further decline in the working population is expected in the future due to the declining birthrate and aging population. As a solution to such labor shortages, there is a growing interest in the use of autonomous mobile robots. In order to actually utilize autonomous mobile robots, awareness of the surroundings is an important issue in running the robot. Stereo cameras are often used to acquire information about the surroundings. However, it is difficult for a stereo camera to obtain information on the surroundings in a single shot due to the angle of view. Therefore, we focused on an obstacle detection method using a fisheye camera, which has the advantage of acquiring information on all 360 locations around the obstacle at a time. In this study, we propose a new obstacle position detection method using three fisheye cameras.

DOI： 10.12792/iciae2023.060

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2814/1842

Self-position Estimation Method Independent of Illumination Variations by Means of Three-point Positioning Using Frequency-modulated LED and Photodiode Reviewed International journal

Takeshi Sugasaka, Kanto Kumamoto, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 341 - 347 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

In recent years, automated guided vehicles (AGVs) have been widely used in factories and hospitals. Robots are expected to become popular in general households for reasons such as nursing care, and it is necessary for it to consist of simple equipment with small purchase cost. In this study, we developed a new method of self-position estimation using frequency-modulated LEDs and photodiodes. Compared with conventional methods, the new method can cope with fluctuations in LED illumination, and the calculation method has been further modified. In the experiment, the actual position and the calculated position were compared, and it was found that the error was as small as 1.1 cm, indicating that the self-position estimation was feasible.

DOI： 10.12792/iciae2023.059

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2813/1841

Proposal of Omnidirectional Position Measurement Method Using Two Fisheye Cameras Faced Each Other Reviewed International journal

Keita Fukushima, Yuto Watanabe, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 337 - 340 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

In recent years, demand for autonomous mobile robots has been increasing worldwide. Obstacle detection is essential for the movement of robots. Therefore, we conducted a study aiming to measure 360° of the surroundings at a time using cameras. We succeeded in measuring the distance to an obstacle from the captured image using a method in which omnidirectional cameras were placed facing each other.

DOI： 10.12792/iciae2023.058

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2812/1845

Optical Measurement Method for Stainless Steel Rods with Oil Film Using Reflected and Transmitted Light Distributions Reviewed International journal

Daiki Yoshinaka, Kai Nakano, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 333 - 336 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

It is easy to measure the diameter of a stainless steel rod by irradiating a laser beam onto it. However, when a laser beam is irradiated onto a stainless steel rod whose surface is coated with oil, it becomes difficult to measure the diameter of the stainless steel circular rod due to the thickness of the oil. To reduce this error, a previous study measured using only the reflected light distribution. To solve the problems found in the previous study and to improve the accuracy, this study proposes a new method with the addition of transmitted light distribution.

DOI： 10.12792/iciae2023.057

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2811/1840

Proposal of Automatic Transport System by Recognizing Lanes and AR Markers Using a Fisheye Camera Reviewed International journal

Kento Hisanaga, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 165 - 172 2023.03

Language：English Publishing type：Research paper (international conference proceedings)

日本 OKINAWA 2023.03.26 - 2023.03.30

In recent years, the declining working population due to the declining birthrate and aging population has become a problem in Japan. Automated Guided Vehicles (AGVs) that can be used in factories and warehouses are attracting attention as a solution to this problem. A line-trace type automatic guided vehicle (AGV) is used as one of the methods of automatic guided vehicle (AGV). However, this method has the disadvantage that it takes time to introduce and it is not easy to change the route. In addition, the method using a stereo camera is mainly used for automatic transport robots using image processing such as factories. However, the stereo camera has a problem that the shooting range is narrow. Against this background, we have developed a new approach to automated transport by using a fisheye camera to recognize AR markers and lanes. The use of a fisheye camera expands the recognition range, the use of lanes already used in factories reduces the time and effort required for introduction, and the recognition of AR markers makes it easy to change routes. In this research, we verified the measurement accuracy of AR markers and lanes, made it real-time, implemented it on a robot, and verified the control accuracy of the robot.

DOI： 10.12792/iciae2023.031

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2023/paper/viewFile/2815/1843

Proposal for an Automatic Recall Assistance System Using Face Recognition, Voice Recognition, and Conversational Content Reviewed International journal

Shunpei Chochi, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 11th IIAE International Conference on Industrial Application Engineering 2023 ( The Institute of Industrial Applications Engineers ) 161 - 164 2023.03

Proposal of Host Computer Camera Controlling Method for Remote Meeting System User Utilizing Gesture Recognition Reviewed International journal

Saito T., Yang S., Serikawa S., Yao F.

ACM International Conference Proceeding Series 47 - 53 2022.05

Proposal of a Method for Detecting Sensor Failure Using General-Purpose Sensing Circuit Reviewed International journal

Kei Sato, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 10th IIAE International Conference on Industrial Application Engineering 2022 ( The Institute of Industrial Applications Engineers ) 181 - 185 2022.04

Language：English Publishing type：Research paper (international conference proceedings)

日本 Matsue 2022.03.26 - 2022.03.30

In this paper, we propose a method of detecting sensor failure and degradation and a method of calibrating degraded sensors using a general-purpose sensing circuit, so that failed sensors can be automatically replaced and degraded sensors can be calibrated.

DOI： 10.12792/iciae2022.032

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2022/paper/viewFile/2608/1690

Proposal of a System Automatically Powered for Continued Operation of Active Landmark Reviewed International journal

Shohei Noguchi, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 10th IIAE International Conference on Industrial Application Engineering 2022 ( The Institute of Industrial Applications Engineers ) 199 - 202 2022.04

Language：English Publishing type：Research paper (international conference proceedings)

日本 Matsue 2022.03.26 - 2022.03.30

We develop a power supply system for continuous operation mounted on the robot side and a function to determine whether charging is necessary on
the active landmark side, and a system in which both communicate.

DOI： 10.12792/iciae2022.036

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2022/paper/viewFile/2612/1695

Proposal of a Hybrid Drone with Coaxial Reversing Double Rotor Reviewed International journal

Shiyuan Yang, Satoru Matsuo, Seiichi Serikawa

Proceedings of The 10th IIAE International Conference on Industrial Application Engineering 2022 ( The Institute of Industrial Applications Engineers ) 195 - 198 2022.04

Authorship：Lead author,　Corresponding author Language：English Publishing type：Research paper (international conference proceedings)

日本 Matsue 2022.03.26 - 2022.03.30

The authors propose a hybrid drone with coaxial reversing double rotor that consists of a large coaxial reversing double rotor and a general drone for increasing its payload. We construct our proposed hybrid drone by setting a large coaxial reversing double rotor on the upside of a drone so that can increase the payload without increasing the width of the drone. Experimental results showed the propose hybrid drone can be controlled as same as a general drone and the payload can be increased

DOI： 10.12792/iciae2022.035

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2022/paper/viewFile/2611/1693

A Method for Identification of Door Type in an Image by Machine Learning Reviewed International journal

Shunpei Chochi, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 10th IIAE International Conference on Industrial Application Engineering 2022 ( The Institute of Industrial Applications Engineers ) 191 - 194 2022.04

Language：English Publishing type：Research paper (international conference proceedings)

日本 Matsue 2022.03.26 - 2022.03.30

The purpose of this paper is to identify doorknobs and handles in images using machine learning as a preliminary step to the development of an autonomous mobile robot that can open and close arbitrary doors. We used Random Forest as one of the machine learning. This model uses majority voting or averaging to reduce overfitting, which is a problem with many decision tree machine learning techniques.

DOI： 10.12792/iciae2022.034

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2022/paper/viewFile/2610/1696

A Monitoring System for Detecting 7 Type Events in a House Using Same Optical Sensor Reviewed

Takahiro Fukuda, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 10th IIAE International Conference on Industrial Application Engineering 2022 ( The Institute of Industrial Applications Engineers ) 186 - 190 2022.04

Language：English Publishing type：Research paper (international conference proceedings)

日本 Matsue 2022.03.26 - 2022.03.30

In this study, we propose a system that can monitor multiple events with the same optical sensor and one electronic circuit. We also propose a method for detecting the state of four events, TV, air conditioner, window lock, and door lock, in addition to the conventional three events.

DOI： 10.12792/iciae2022.033

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2022/paper/viewFile/2609/1697

Recognition of Lane Markings in Factories and Method for Self-Position Estimation Using AR Markers Reviewed International journal

Kento Hisanaga, Shiyuan Yang, Seiichi Serikawa

Proceedings of International Conference on Technology and Social Science 2021 (ICTSS 2021) ( NPO e-JIKEI Network Promotion Institute (ENPI) ) IPS-10 ( 10-03 ) 1 - 6 2021.12

Language：English Publishing type：Research paper (international conference proceedings)

Japan online 2021.12.07 - 2021.12.09

Currently, automations of factories are progressing, and the demand for introduction of automatic transfer robots is increasing. However, there are many factories that cannot introduce automation of factories because of cost and time. In this study, we propose an automatic transfer robot system using AR markers in addition to lane markings originally drawn in the factory, to reduce the above problems.

Other Link： http://conf.e-jikei.org/ICTSS/2021/proceedings/materials/proc_files/IPS10/ICTSS2021-IPS10-3-Hisanaga.pdf

Method for Estimation of Position of an Object in a Room Using Cross-Line Laser Reviewed International journal

Masaya Okamoto, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 8th IIAE International Conference on Intelligent Systems and Image Processing 2021 ( The Institute of Industrial Applications Engineers ) 101 - 107 2021.09

Language：English Publishing type：Research paper (international conference proceedings)

Japan Kobe(online) 2021.09.06 - 2021.09.10

We have developed a new method to estimate the position of an object using a cross laser and a camera. In this study, we verified the measurement accuracy by constructing the estimation principle and implementing the system.

DOI： 10.12792/icisip2021.019

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2021/paper/viewFile/2517/1613

Proposal of a method to detect obstacle using projector and camera Reviewed International journal

Hayato Mizuno, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 8th IIAE International Conference on Intelligent Systems and Image Processing 2021 ( The Institute of Industrial Applications Engineers ) 213 - 220 2021.09

Language：English Publishing type：Research paper (international conference proceedings)

Japan Kobe(online) 2021.09.06 - 2021.09.10

In this study, we conducted three experiments to verify
the superiority of this study when compared with the
previous studies. As a result of the experiment, it was
confirmed that this study improved the disadvantages of the conventional method and the previous study.

DOI： 10.12792/icisip2021.037

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2021/paper/viewFile/2531/1621

Recognition of lane markings in factories and self-position estimation method using AR markers Reviewed International journal

Kento Hisanaga,, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 8th IIAE International Conference on Intelligent Systems and Image Processing 2021 ( The Institute of Industrial Applications Engineers ) 205 - 212 2021.09

Language：English Publishing type：Research paper (international conference proceedings)

Japan Kobe(online) 2021.09.06 - 2021.09.10

In this research, we estimated the self-position in the factory, proposed a robot control method using lane marking, and verified the measurement accuracy of the system in real time.

DOI： 10.12792/icisip2021.036

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2021/paper/viewFile/2528/1620

Proposal of a Method for Real-time Detection of Obstacle Using Line Laser and Camera Reviewed

Masaya Okamoto, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 9th IIAE International Conference on Industrial Application Engineering 2021 ( The Institute of Industrial Applications Engineers ) 188 - 194 2021.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州 2021.03.26 - 2021.03.30

In this study, we developed a new approach for obstacle
detection using a line laser and a camera. As a result of measuring the distance to the obstacle and the size of the obstacle, the measurement error was small, and it was confirmed that the system could detect the obstacle with good accuracy.

DOI： 10.12792/iciae2021.034

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2021/paper/viewFile/2433/1565

Proposal of a Method to Detect Position of Moving Object from a Camera Using LEDs and Markers Reviewed International journal

Takato Komori, Shiyuan Yang

Proceedings of The 9th IIAE International Conference on Industrial Application Engineering 2021 ( The Institute of Industrial Applications Engineers ) 251 - 254 2021.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州 2021.03.26 - 2021.03.30

We proposed a new indoor position detection method using a surveillance camera and LED markers. By using the information from camera image and the angles and height of the camera, a high accuracy position detection can be achieved when the height of the target LED maker can be obtained in our experiments.

DOI： 10.12792/iciae2021.045

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2021/paper/viewFile/2436/1586

Obstacle Detection and Detour System Using Line Laser and Camera Reviewed International journal

Miki Suetsugu, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 9th IIAE International Conference on Industrial Application Engineering 2021 ( The Institute of Industrial Applications Engineers ) 228 - 232 2021.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州 2021.03.26 - 2021.03.30

This paper develops a system that can easily and widely
detect and avoid obstacles with one system by using a line laser and a camera. It is possible to detect and avoid obstacles easily and widely with this system by our experiments.

DOI： 10.12792/iciae2021.041

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2021/paper/viewFile/2437/1564

Detection of Indoor Corridor Walls Using Line Laser and Camera Reviewed

Miki Suetsugu, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 8th IIAE International Conference on Industrial Application Engineering 2020 (ICIAE2020) ( The Institute of Industrial Applications Engineers ) 146 - 170 2020.03

Language：English Publishing type：Research paper (international conference proceedings)

日本松江（新型コロナウィルスの影響で中止） 2020.03.26 - 2020.03.30

In this study, we
constructed a simple system by using a line laser and a
camera mounted on an automatic moving cart, and
performed experiments under the conditions moving straight in parallel to the wall and toward the wall. Experimental results showed that it can be performed easily with widely detection area in one system.

DOI： 10.12792/iciae2020.033

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2020/paper/viewFile/2367/1523

Proposal of obstacle detection and shape recognition method for transfer robot using line laser and camera Reviewed

Miki Suetsugu, Shiyuan Yang, Seiichi Serikawa

Proceedings of the 7th IIAE International Conference on Intelligent Systems and Image Processing 2019 ( The Institute of Industrial Applications Engineers ) 202 - 206 2019.09

Language：English Publishing type：Research paper (international conference proceedings)

Taiwan, China Taipei 2019.09.05 - 2019.09.09

We propose an obstacle recognition method. In this method, not only obstacle detection but also shape recognition can be carried out, and even if there is an obstacle on the runway. It can be flexibly avoided and efficiently transported.

DOI： 10.12792/icisip2019.039

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2019/paper/viewFile/2265/1417

Development of solar shading system for preventing driving accidents using transparent display Reviewed

Shintaro Matsuo, Seiichi Serikawa, Shiyuan Yang

Proceedings of the 7th IIAE International Conference on Intelligent Systems and Image Processing 2019 ( The Institute of Industrial Applications Engineers ) 198 - 201 2019.09

Language：English Publishing type：Research paper (international conference proceedings)

Taiwan, China Taipei 2019.09.05 - 2019.09.09

We develop a system that automatically blocks sunlight using a LCD panel and camera. The LCD panel used in this study can be controlled to a portion that transmits light and a portion that blocks light.

DOI： 10.12792/icisip2019.038

Other Link： https://www2.ia-engineers.org/conference/index.php/icisip/icisip2019/paper/viewFile/2265/1423

Proposal of a Method to Detect Size of Overlapping Cardboard Boxes Using Plural Lightings Reviewed

Ryota Iwaizono, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 7th ACIS International Conference on Applied Computing & Information Technology (ACIT 2019) ( 30 ) 1 - 6 Article No.: 30, pp. 1～6 2019.05

Language：English Publishing type：Research paper (international conference proceedings)

USA Honolulu, Hawaii 2019.05.29 - 2019.05.31

This study proposes a method to detect the size and position of a cardboard box using four lights. Experimental results showed even if the cardboard box is overlapped, we can detect the size and positon of a box correctly.

Proposal of Distance Measurement using Ceiling Light and Two Photodiodes to Conpensationg Light Variation Reviewed

Kanako Kinoshita, Shiyuan Yang, Mingyao Qi

Proceedings of The 7th IIAE International Conference on Industrial Application Engineering 2019 (ICIAE2019) ( The Institute of Industrial Applications Engineers ) 257 - 260 2019.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州市 2019.03.26 - 2019.03.30

In this study, we used two photodiodes to realize a
method to estimate the position irrespective of the
illuminance intensity variation of LED lighting. Moreover, since the system itself uses inexpensive photodiodes, it has a merit of low cost.

DOI： 10.12792/iciae2019.050

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2019/paper/viewFile/2110/1345

Proposal of a Method to Detect Size of Overlapping Cardboard Boxes Using Plural Lightings Reviewed

Ryota Iwaizono, Shiyuan Yang, Seiichi Serikawa

Proceedings of The 7th IIAE International Conference on Industrial Application Engineering 2019 (ICIAE2019) ( The Institute of Industrial Applications Engineers ) 270 - 274 2019.03

Language：English Publishing type：Research paper (international conference proceedings)

日本北九州市 2019.03.26 - 2019.03.30

In this study we propose a method to detect the size and position of a cardboard box using four lights. Some experimental results showed this method is useful.

DOI： 10.12792/iciae2019.053

Other Link： https://www2.ia-engineers.org/conference/index.php/iciae/iciae2019/paper/viewFile/2110/1346

Self-location Detection Method for Moving Objects Using One Camera and Multiple Light Sources Reviewed

Kanako Kinoshitaa, Akihiro Itoa, Shiyuan Yang

Proceedings of the 6th IIAE International Conference on Intelligent Systems and Image Processing 2016 442 - 449 2018.09

Synthesize of a Kinoform for CGH Reconstruction Using Angler Spectrum Method Reviewed

Yusei Uezono, Kouki Nakashima, Shiyuan Yang

Proceedings of the 6th IIAE International Conference on Intelligent Systems and Image Processing 2016 146 - 149 2018.09

Location Estimation Method using Photoconductor Diode and Room Lighting Reviewed

Kanako Kinoshita, Akihiro Ito, Kenta Kagemoto, Mizuho Kimura, Shiyuan Yang

Proceedings of The 6th IIAE International Conference on Industrial Application Engineering 2018 (ICIAE2018) 270 - 276 2018.03

Iterative Dummy Area Method for the Improvement of CGH Reconstruction using Angler Spectrum Method Reviewed

Yusei Uezono, Koki Nakashima, Shiyuan Yang

Proceedings of The 6th IIAE International Conference on Industrial Application Engineering 2018 (ICIAE2018) 283 - 286 2018.03

Dependence of CGH Reconstruction due to the Transfer Phase Function of Angular Spectrum Method Reviewed

Marika Harada, Koki Nakashima, Mizuho Kimura, Shiyuan Yang

Proceedings of The 6th IIAE International Conference on Industrial Application Engineering 2018 (ICIAE2018) 277 - 282 2018.03

Consideration on Sampling Interval in Computer-generated Hologram Using Angle Spectrum Method Invited Reviewed

Koki Nakashima, Mizuho Kimura, Shiyuan Yang

Proceedings of The 5th IIAE International Conference on Industrial Application Engineering 2017 8 - 11 2017.03

Dependence Initial Phase Distribution for Kinoform Speckle Elimination Invited Reviewed

Akihiro Ito, Takayuki Yokoyama, Shiyuan Yang

Proceedings of The 5th IIAE International Conference on Industrial Application Engineering 2017 12 - 16 2017.03

Coordinate Detection for Automatic Guided Vehicle Using Indoor Ceiling LED Lights Invited Reviewed

Shiyuan Yang, Kenta Kagemoto, Kosuke Onishi

Proceedings of The 5th IIAE International Conference on Industrial Application Engineering 2017 171 - 174 2017.03

New Trend of LED Position Detection for Indoor Applications Invited Reviewed

Shiyuan Yang

Proceedings of The 5th IIAE International Conference on Industrial Application Engineering 2017 3 - 3 2017.03

Position Detection of Moving Objects Using a Two Dimensional PSD and the Ceiling LED Lighting Reviewed

Kenta Kagemoto, Kosuke Onishi, Shiyuan Yang

Proceedings of the 4rd IIAE International Conference on Intelligent Systems and Image Processing 2016 160 - 166 2016.09

Position Detection Using One Photodiode and Multiple LED Makers Reviewed

Kosuke Onishi, Nobuhiro Hirano, Shiyuan Yang

Proceedings of the 4rd IIAE International Conference on Intelligent Systems and Image Processing 2016 322 - 326 2016.09

Influence on Sampling Interval of 3D Object in CGH Reconstruction Reviewed

Kimura Mizuho, Daiki Yasukochi, Takayuki Yokoyama, Yosuke Koga, Shiyuan Yang

Proceedings of The 4th IIAE International Conference on Industrial Application Engineering 2016 434 - 437 2016.03

Improvement of Reconstruction of Fourier Computer-generated Hologram Using Phase Freedom Reviewed

Daiki Yasukochi, Yosuke Koga, Shiyuan Yang

Proceedings of the 3rd IIAE International Conference on Intelligent Systems and Image Processing 2015 7 - 10 2015.09

Error Reduction Algorithm for the Generation of a Kinoform Reviewed

Takayuki Yokoyama, Yosuke Koga, Shiyuan Yang

Proceedings of the 3rd IIAE International Conference on Intelligent Systems and Image Processing 2015 70 - 73 2015.09

Three Dimensional Position Detection Using a Two Dimensional PSD and a Marker Composed of Two Light Sources Reviewed

Kosuke Onishi, Daisuke Tanaka, Shiyuan Yang

Proceedings of the 3rd IIAE International Conference on Intelligent Systems and Image Processing 2015 92 - 99 2015.09

3D Position Detection with a PSD Using Frequency Modulated Light Markers Reviewed

Kosuke Onishi, Daisuke Tanaka, Shiyuan Yang

Proceedings of the 3rd International Conference on Industrial Application Engi-neering 2015 227 - 233 2015.03

Improvement of Reconstruction Resolution of Computer-generated Hologram Using Phase Freedom Reviewed

Daiki Yasukochi, Yuki Misaki, Yosuke Koga, Shiyuan Yang

Proceedings of the 3rd International Conference on Industrial Application Engineering 2015 4 - 7 2015.03

Method for Controlling the Intensity Distribution of Laser Diode Array Using Computer- generated Hologram Reviewed

Takayuki Yokoyama, Yuki Misaki, Yosuke Koga, Shiyuan Yang

Proceedings of the 3rd International Conference on Industrial Application Engineering 2015 20 - 23 2015.03

Fractional Lower-order Statistics for Yangzhou Dialectal Speech Recognition Reviewed

Huimin Lu, Yujie Li, Shiyuan Yang, Xuelong Hu, Seiichi Serikawa

Proceedings of the 3rd Internatio-nal Conference onIndustrial Application Engineering 2015 394 - 397 2015.03

Effect of dummy area in the generation of computer-generated hologram to improve the reconstruction diffraction efficiency Reviewed

Yuki Misaki; Yosuke Koga, Shiyuan Yang, Seiichi Serikawa

Proc. SPIE 9271, Holography, Diffractive Optics, and Applications VI 92712F No. 92710N 2014.11

Transformation of top-hat distribution from Gaussian laser beam using a kinoform Reviewed

Shiyuan Yang, Seiichi Serikawa

Proc. SPIE 9271, Holography, Diffractive Optics, and Applications VI 8556 No. 92710N 2014.11

Beam Shaping of Multiple Laser Diodes Using a Kinoform Reviewed

Yosuke Koga, Yuki Misaki, Shiyuan Yang

Journal of the Institute of Industrial Applications Engineers 2 ( 2 ) 80 - 84 2014.04

Generation of Audible Sound at Local Area Using Ultrasonic Waves Reviewed

Shiyuan Yang, Yuu Kouno and Seiichi Serikawa

Information 17 ( 2 ) 551 - 557 2014.02

Iterative Dummy Area Method with Flexible Dummy Area Size for the Design of Kinoform Reviewed

Toshinori Hora, Shiyuan Yang, Seiichi Serikawa

Journal of Institute of the Industrial Applications Engineers 1 ( 2 ) 69 - 72 2013.10

Proposal of a multi-frame images fusion model on dual tree complex wavelet transform domain Reviewed

Shiyuan Yang, Huimin Lu, Yujie Li, Seiichi Serikawa

Proceedings of International Conference on Machine Learningand Cybernetics 2013 2013.07

Laser beam shaping using a kinoform Reviewed

Shiyuan Yang, Toshinori Hora, Seiichi Serikawa

The Japanese Journal of the Institute of Industrial Applications Engineers 1 ( 1 ) 27 - 32 2013.03

Proposal of 3 Dimension Imaginary Space Touch Panel ofNon-wearing Using Ultrasonic Sensor Reviewed

Kohei Miyata, Yuhki Kitazono, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 28 - 31 2013.03

Safety Light Curtain System Using a Hemispherical Mirror with Multiple Light Sources Reviewed

Yusuke Kenjou, Ryosuke Suzue, Kohei Miyata, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 207 - 213 2013.03

Guided Depth Image Filter-based Image Feathering Reviewed

Yujie Li, Huimin Lu, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 100 - 103 2013.03

Proposal of a Device Detecting Two Dimensional Coordinates Using PSD Sensor and Ultrasonic Sensor Reviewed

Yuya Kawahara, Ryuichi Udo, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 214 - 220 2013.03

Generation of Psudo Random Phase Distribution of Laser Light Reviewed

Yuki Misaki, Toshinori Hora, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 232 - 235 2013.03

Iterative Dummy Area Methodwith Flexible Dummy Area Size for the Design of Kinoform Reviewed

Toshinori Hora, Shiyuan Yang

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 269 - 272 2013.03

Method of Concurrent Detection for Multiple Light Sources Position by Using the PSD Reviewed

Shiyuan Yang, Kiyotada Matsura, Shun Inoue, Fenghui Yao

Proceedings of the 1st Internatio-nal Conference onIndustrial Application Engi-neering 2013 273 - 276 2013.03

Maximum local energy method and sum modified laplacian for remote image fusion based on beyond wavelet transform Reviewed

Lifeng Zhang, Yujie Li, Huimin Lu, Akira Yamawaki, Shiyuan Yang, Seiichi Serikawa

Applied Mathema-tics and Information Sciences 7 ( 1S ) 149 - 156 2013.02

Fast level set segmentation method in medical multi-sensor images detection Reviewed

Huimin Lu, Yujie Li, Lifeng Zhang, Shiyuan Yang, Seiichi Serikawa

International Journal of Advancements in Computing Technology 4 ( 23 ) 475 - 482 2012.12

Iterative partial quantization method for the error reduction of low-quantized kinoforms Reviewed

Shiyuan Yang, Toshinori Hora, Seiichi Serikawa

Proc. of SPIE 8556 No. 85561A 2012.11

Iterative phase difference constraint method for the speckleelimination of kinoforms Reviewed

Toshinori Hora, Shiyuan Yang, Seiichi Serikawa

Proc. of SPIE 8556 No. 85561V 2012.11

A novel safety light curtain system using a hemispherical mirror Reviewed

Yusuke Kenjo, Ryosuke Suzue, Huimin Lu, Kohei Miyata, Shiyuan Yang, Seiichi Serikawa

Proc. of SPIE 8561 No. 856119-1-8 2012.11

A fast debris flow disasters areas detection method of earthquake images in remote sensing system Reviewed

Huimin Lu, Yujie Li, Shota Nakashima, Shiyuan Yang, Seiichi Serikawa

Disaster Advances 5 ( 4 ) 796 - 799 2012.10

Fast Level Set Segmentation Method in Medical Multi-sensor Images Detection in Complex Scenes "jointly worked" Reviewed

1) Huimin Lu, Lifeng Zhang, Kohei Miyata, Yujie Li, Shiyuan Yang, Xuelong Hu, Seiichi Serikawa

Sensor Letters 10 ( 3 ) 1 - 4 2012.03

An Improved Detection Algorithm Based on Morphology Methods for Blood Cancer Cells Detection"jointly worked" Reviewed

2) Yujie Li, Huimin Lu, Lifeng Zhang, Yuhki Kitazono, Kohei Miyata, Shota Nakashima, Shiyuan Yang, Seiichi Serikawa

Journal of Computational Information Systems (Binary Information Press) 7 ( 13 ) 4724 - 4731 2011.12

A Monitoring System to Prevent Forgetting to Take Medicines on Time Using Funnel-Shaped Sensors"jointly worked" Reviewed

Yuhki Kitazono, Takuya Matsumoto, Shota Nakashima, Shiyuan Yang, Seiichi Serikawa

Applied Mechanics and Materials 103 606 - 610 2011.09

Time-divided computer-generated holograms for the construction of spatial continuous laser light distribution"jointly worked" Reviewed

Shiyuan Yang, Toshinori Hora, Seiichi Serikawa

Applied Mechanics and Materials 103 679 - 682 2011.09

Detection of multiple moving points with a position sensitive device Using modulated light targets"jointly worked" Reviewed

Shiyuan Yang, Kiyotada Matsura, Seiichi Serikawa

Applied Mechanics and Materials 103 683 - 686 2011.09

Development of Stationary User Interface Using Head-Tracking"jointly worked" Reviewed

Kohei Miyata, Yuhki Kitazono, Shiyuan Yang, Seiichi Serikawa

Applied Mechanics and Materials 103 711 - 716 2011.09

Proposal of Fast Implicit Level Set Method for Image Segmentation Using the Chan and Vese Model"jointly worked" Reviewed

Huimin Lu, Seiichi Serikawa, Yujie Li, Shiyuan Yang, Lifeng Zhang, Xuelong Hu

Applied Mechanics and Materials 103 695 - 699 2011.09

An Improved Method for CT/MRI Image Fusion Based on Bandelets Transform Domain"jointly worked" Reviewed

6) Huimin Lu, Shota Nakashima, Lifeng Zhang, Yujie Li, Shiyuan Yang, Seiichi Serikawa

Applied Mechanics and Materials 103 700 - 704 2011.09

A New Image Segmentation Based on Improved Faset Implicit Level Set Scheme in X/-ray Inspection System"jointly worked" Reviewed

Yujie Li, Huimin Lu, Lifeng Zhang, Shiyuan Yang, Seiichi Serikawa

Applied Mechanics and Materials 103 705 - 710 2011.09

Proposal of Wearable Multi-Remote Controller Using Head-Tracking"jointly worked" Reviewed

Kohei Miyata, Yuhki Kitazono, Shiyuan Yang, Seiichi Serikawa

Journal of Advanced Computational Intelligence and Intelligent Informatics (Fuji Technology Press) 15 ( 5 ) 731 - 736 2011.08

Local Energy based Image Fusion in Sharp Frequency Localized Contourlet Transform Reviewed

Huimin Lu,Xuelong Hu,Lifeng Zhang,Shiyuan Yang,Seiichi Serikawa

Journal of Computational Information Systems 6 ( 14 ) 3997 - 4005 2010.12

Local Energy based Multi-focus Image Fusion Method on Curvelet Transforms Reviewed

Huimin Lu,Yujie Li,Yuhki Kitazono,Yang Shiyuan,Lifeng Zhang,Seiichi Serikawa

10th International Symposium on Communications and Information Technologies 2010 ( 011 ) 1154 - 1157 2010.10

A Proposal of High-Performance Method for Distance Measuring Sensor united with PSD Reviewed

Shota Nakashima,Takafumi Nakamuta,Yuhki Kitazono,Shiyuan Yang,Seiichi Serikawa

Applied Mechanics and Materials (Trans Tech Publications) 36 365 - 369 2010.10

Local Energy based Multi focus Image fusion in Beyond Wavelets Transform Reviewed

Huimin Lu,Xuelong Hu,Shota Nakashima,Lifeng Zhang,Shiyuan Yang,Seiichi Serikawa

International Workshop on Image Analysis (IWIA2010) 2010.08

Local Energy and Sum Modified Laplacian-based Image Fusion Method in Sharp Frequency Localized Contourlet Transform Domain Reviewed

Huimin Lu,Seiichi Serikawa,Xuelong Hu,Lifeng Zhang,Shota Nakashima,Shiyuan Yang

2010 International Colloquium on Computing, Communication, Control, and Management I - 285 2010.08

Modified Lohmann Computer-Generated Holograms to Reconstruct Spatial Continuous Distribution Reviewed

Hao Huang,Huimin Lu,Shiyuan Yang,Seiichi Serikawa

2010 International Colloquium on Computing, Communication, Control, and Management IV - 257 2010.08

Improvements on the Performance of Distance Measurement using Paralleled Position Sensitive Detector Sensors Reviewed

Shota Nakashima,Takafumi Nakamuta,Yuhki Kitazono,Shiyuan Yang,Seiichi Serikawa

International Conference on Precision Instrumentation and Measurement 2010 ( A011 ) 2010.03

Proposal of system for prevention of forgetting to take medicines using capacity Reviewed

Yuhki Kitazono,Xianglan Zheng,Shota Nakashima,Shiyuan Yang,Seiichi Serikawa

Procedia-Social and Behavioral Sciences (Elsevier) 2 ( 1 ) 193 - 197 2010.03

Proposal of Sensors for Robot Supporting to Take Medicines on Time Reviewed

Yuhki Kitazono,Xianglan Zheng,Shota Nakashima,Shiyuan Yang,Seiichi Serikawa

The Fifteenth International Symposium on Artificial Life and Robotics 2010 ( GS8-3 ) 358 - 361 2010.02

System for the Prevention of Forgetting to Take Medicines with Medicine Sensor and Chewing Sensor Reviewed

Xianglan Zheng,Yuhki Kitazono,Shota Nakashima,Shiyuan Yang,Seiichi Serikawa

The 10th International Conference on Computers, Communications and Systems ( A4-01 ) 2009.11

Proposal of System for Prevention of Forgetting to Take Medicines Using Capacity Reviewed

Yuhki Kitazono,Xianglan Zheng,Shota Nakashima,Shiyuan Yang,Seiichi Serikawa

International Conference on Security Camera Network, Privacy Protection and Community Safety 2009 ( A025 ) 2009.10

Error Reduction of Low-quantized Kinoforms Using a Direct Search Method. Reviewed

S. Kojo,S. Yang,H. Takajo

Technical Digest of the Thirteenth Microoptics Conference 190 - 191 2007.10

Design of Binary Computer-Gemerated Holograms to Avoid Speckles with a Phase Difference Constraint method. Reviewed

M. Nakata,S. Yang,H. Takajo

Technical Digest of the Thirteenth Microoptics Conference 232 - 233 2007.10

Blind Deconvolution Method Using the Zero-Constraint. Reviewed

T. Ueda,S. Yang,H. Takajo

Technical Digest of the Thirteenth Microoptics Conference 278 - 279 2007.10

A steapest-descent-based blind deconvolution method aided by Ayers-dainty's and genetic algorith Reviewed

T. Ueda,S. Yang,and H. Takajo

5th International Conference on Optics-photonics Design & Fabrication 217 - 218 2006.12

Error reduction of binary computer-generated holograms to construct two-dimensional continuous intensity distribution using direct binary search Reviewed

M. Nakata,N. Wada,S. Yang,and H. Takajo

5th International Conference on Optics-photonics Design & Fabrication 125 - 126 2006.12

Phase Retrieval from Quantized Fourier Intensity Using a Multispectra Method with Rapid-Descent Measuring Ranges Reviewed

S. Yang,H. Takajo

Jpn. J. Appl. Phys. 45 ( 3A ) 1832 - 1835 2006.03

二次元連続光強度分布を生成するバイナリ計算機ホログラムの最適化

楊世淵,永井拓丸,本村賢司,高城洋明

電子情報通信学会技術研究報告 105 ( 606 ) 31 - 34 2006.02

キノフォームを用いたレーザービーム整形

楊世淵,高城洋明

光波センシング技術研究会 111 - 116 2005.12

Phase Retrieval from Quantized Fourier Intensity Using a Modified Multispectra Method Reviewed

S. Yang,H. Ikeda,H. Takajo

Tech. Dig. 11th Microoptics Conf. 180 - 181 2005.11

Oversampling Method for Phase Retrieval from Quantized Fourier Intensity Reviewed

M. Itoh,S. Yang,H. Takajo

Tech. Dig. 11th Microoptics Conf. 182 - 183 2005.11

Speckle reduction of kinoform reconstruction utilizing the 2π ambiguity of image phase differences Reviewed

S. Yang,H. Takajo

Optical Review 12 ( 2 ) 93 - 96 2005.04

Multispectra method for error reduction of the quantized Fourier modulus in the iterative Fourier transforn algorithms used for phase retrieval Reviewed

S. Yang,H. Takajo

Optical Engineering 43 ( 3 ) 713 - 717 2004.04

Quantization error reduction in the measurement of Fourier intensity for phase retrieval Reviewed

S. Yang,H. Takajo

Jpn. J. Appl. Phys. 43 ( 8B ) 5747 - 5751 2004.04

Iterative speckle reduction algorithm for the optimization of digital holograms Reviewed

S. Yang,H. Takajo

Proc. 2004 ICO International Conference, Optics & Photonics in Technology Frontier 219 - 220 2004.04

Error reduction of quantized Fourier modulus in the iterative Fourier transform algorithms used for phase retrieval Reviewed

S. Yang,H. Takajo

Tech. Dig. 9th Microoptics Conf 218 - 221 2003.04

Binary phase difference diffuser: design and application in digital holography Reviewed

B. B. Chhetri,S. Serikawa,S. Yang,and T. Shimomura

Optical Engineering 41 ( 2 ) 319 - 327 2002.04

Iterative calculation of the quasi-bandlimited diffuser in two dimensions from restricted phase distributions Reviewed

B. B. Chhetri,S. Serikawa,S. Yang,T. Shimomura

ICO XIX: Optics for the Quality of Life 293 - 294 2002.04

Speckle reduction of kinoform reconstruction by utilizing the 2p ambiguity of image phase differences Reviewed

S. Yang,B. B. Chhetri,S. Serikawa,T. Shimomura

ICO XIX: Optics for the Quality of Life 1059 - 1060 2002.04

Parameter dependence of the iterative stepwise quantization method in hologram binarization for real and complex amplitude signals Reviewed

B. B. Chhetri,J. Motojima,S. Yang,and T. Shimomura

Optical Review 8 ( 4 ) 260 - 266 2001.04

Iterative stepwise binarization of digital holograms with added energy to the signal window Reviewed

B. B. Chhetri,S. Yang,and T. Shimomura

Optical Engineering 40 ( 12 ) 2718 - 2725 2001.04

Error reduction of amplitude digital Fourier transform holograms by use of a pre-iterative process Reviewed

S. Yang,B. B. Chhetri,T. Shimomura

Proc. of SPIE 4416 116 - 119 2001.04

Design of binary Fourier holograms using DBS for Reduced-Speckle-Reconstruction Reviewed

B. B. Chhetri,S. Yang,T. Shimomura

Technical Digest, CLEO/Pacific Rim 2001 698 - 699 2001.04

Stochastic approach in the efficient design of the direct-binary-search algorithm for hologram synthesis. Reviewed

B. B. Chhetri,S. Yang,and T. Shimomura

Applied Optics 39 ( 32 ) 5956 - 5956 2000.04

Error dependence of quantized kinoform reconstruction on the position of the desired image. Reviewed

S. Yang,T. Shimomura

Applied Optics 39 ( 17 ) 2896 - 2903 2000.04

Parameter dependence of iterative stepwise quatization process in hologram binarization Reviewed

B. B. Chhetri,S. Yang,T. Shimomura

2nd International Conference on Optical Design and Fabrication 173 - 176 2000.04

Fast calculation of iterative dummy area algorithms for the optimization of kinoforms. Reviewed

S. Yang,R. Yamano,S. Serikawa,K. Morita,T. Shimomura

2nd International Conference on Optical Design and Fabrication 169 - 172 2000.04

Improvements of quantized kinoform reconstruction by changing the position of the desired image Reviewed

S. Yang,T. Shimomura

Proceedings of SPIE 3740 250 - 253 1999.04

On- and off-axis reconstruction of kinoforms using an iterative dummy area method Reviewed

S. Yang,T. Shimomura

Optica Review 5 ( 6 ) 327 - 330 1998.04

Error reduction of quantized kinoforms by means of increasing the kinoform size Reviewed

S. Yang,T. Shimomura

Applied Optics 37 ( 29 ) 6931 - 6936 1998.04

Iterative interlacing technique method for the synthesis of quantized kinoforms by use of stepwise quantization Reviewed

S. Yang,T. Shimomura

OII '98, Optics for Information Infrastructure 9 168 - 170 1998.04

Iterative Multikinoform Method for Improving the Reconstruction of kinoform Reviewed

S. Yang,T. Shimomura

OPTICAL REVIEW 4 ( 6 ) 660 - 665 1997.04

Interlacing Technique Approach for the Synthesis of Kinoforms Reviewed

S. Yang,T. Shimomura

Applied Optics 35 ( 35 ) 6983 - 6989 1996.04

Measurements on Low-Frequency Fluctuation in the Laser Diodes Reviewed

S. Yang,T. Sasaki,T. Mizunami,and K. Takagi

IEEE Transactions on Electron Devices 41 ( 11 ) 2162 - 2164 1994.04

New optical reconstruction with computer-generated holograms by peano scan using an LCTV-SLM Reviewed

K. Tanaka,Y. Sakamoto,S. Yang,T. Shimomura

AM-LCD'94 244 - 247 1994.04

Low-Frequency Fluctuation of the Transport Factor in Junction Transistors Reviewed

K. Takagi,T. Mizunami,S. Yang,M. Wada

Jpn. J. Appl. Phys. 32 ( 9A ) 3782 - 3783 1993.04

Low-frequency noise measurements on the light output and current of laser diodes Reviewed

S. Yang,T. Mizunami,K. Takagi

1993 JIEMT Symposium 259 - 262 1993.04

Current Dependence of 1/f Noise in Junction Diodes Reviewed

S. Yang,T. Mizunami,K. Takagi

Jpn. J. Appl. Phys. 31 ( 6A ) 1752 - 1755 1992.04

Low-Frequency Noise in Compound Semiconductor Optical Devices Reviewed

S. Yang,T. Mizunami,K. Takagi

Proceedings of the International Conference on Noise in Physical Systems and 1/f Fluctuations 321 - 324 1991.04

Low-Frequency Noise in GaAs Reviewed

S. Yang,T. Mizunami,and K. Takagi

Jpn. J. Appl. Phys. 29 ( 7 ) 1250 - 1251 1990.04

1/f Noise in Ceramic Superconductors and Granular Resistors Reviewed

K. Takagi,T. Mizunami,H. Okayama,S. Yang

IEEE Transactions on Components, Hybrids, and Manufacturing Technology 13 ( 2 ) 303 - 305 1990.04

　PREV-NEXT　

<YANG Shiyuan>

Papers - YANG Shiyuan