Faculty Profiles - KOZAKO Masahiro

Papers - KOZAKO Masahiro

Division display201 - 220 of about 400／ All the affair displays >>

Experimental Verification of Operation and Method of Decision of Maximum DC Link Voltage in Wireless Power Transfer System Reviewed

IEEE TENCON 2016 - Technologies for Smart Nation 797 - 800 2016.11

Dependence of Silica Nano Filler added to Epoxy Resin on Creepage Discharge Properties in Mineral Oil Reviewed

10th International Workshop on High Voltage Engineering and 2016 Japan-Korea Joint Symposium on Electrical Discharge and High Voltage Engineering (IWHV2016 & JK2016) ( ED-16-116 SP-16-045 HV-16-101 ) Vol.1,73 - Vol.1,76 2016.11

EARLY DETERIORATION OF PALM FATTY ACID ESTERS (PFAE) OIL Reviewed

10th International Workshop on High Voltage Engineering and 2016 Japan-Korea Joint Symposium on Electrical Discharge and High Voltage Engineering (IWHV2016 & JK2016) ( ED-16-142 SP-16-071 HV-16-127 ) Vol.2,37 - Vol.2,40 2016.11

Comparison of Electrical Insulation Properties of Hydrocarbon-based - Thermosetting Resin and Epoxy Resin Reviewed

IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP2016) ( 3A-18 ) 133 - 136 2016.10

Partial Discharge and Breakdown Characteristics of Inverter-fed Motor Winding with Micro Cellular Coating Reviewed

IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP2016) ( 4B-36 ) 482 - 485 2016.10

Partial Discharge Properties of Resin Molded Insulation Substrate after Long Term Voltage Application Reviewed

IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP2016) ( 4B-29 ) 453 - 456 2016.10

Comparison of Sensor Detection Sensitivity in Repetitive Partial Discharge Inception Voltage Measurement for Twisted Pair Placed in Stator Reviewed

IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP2016) ( 3C-19 ) 239 - 242 2016.10

Partial Discharge Detection and Induced Surface Current Analysis Using Transient Earth Voltage Method for High Voltage Equipment Reviewed

The 2016 International Conference on Condition Monitoring and Diagnosis (CMD2016) ( P1-27 ) 455 - 459 2016.09

Degradation Diagnosis of Electrical Insulation Performance of 6.6 kV Class Epoxy Resin Insulator Contaminated with Iron Powder and Moisture Reviewed

The 2016 International Conference on Condition Monitoring and Diagnosis (CMD2016) ( P2-52 ) 803 - 806 2016.09

Partial Discharge Characteristics of Oil Impregnated Paper Insulation System with Oil Gap under Repetive Impulse Voltage Superimposed on AC Voltage Reviewed

The 2016 International Conference on Condition Monitoring and Diagnosis (CMD2016) ( P1-43 ) 522 - 525 2016.09

Development of Diagnostic Methods for Vacuum Leakage from Vacuum Interrupter by Partial Discharge Detection Reviewed

27th International Symposium on Discharges and Electrical Insulation in Vacuum (ISDEIV2016) ( C1-P-21 ) 611 - 614 2016.09

Partial Discharge Characteristics Of Wedge-Shaped Gap Between Coated Electrodes In SF6 Under Lightning Impulse Voltage Reviewed

21st International Conference on Gas Discharges and Their Applications (GD2016) ( B6 ) 301 - 304 2016.09

Effects of Various Parameters on Movement of Inorganic Particles in Epoxy Liquid under Electric Field Reviewed

IEEJ Transactions on Fundamentals and Materials 136 ( 9 ) 586 - 591 2016.09

Basic study on partial discharge location in power module Reviewed

Mitsudome H., Akinaga Y., Matsuo K., Kozako M., Hikita M., Ikeda Y., Taniguchi K., Nakamura Y., Okamoto K.

Proceedings of the 2016 IEEE International Conference on Dielectrics, ICD 2016 1 451 - 454 2016.08

Language：English Publishing type：Research paper (international conference proceedings)

© 2016 IEEE. This paper deals with partial discharge (PD) location in a power module by measuring electromagnetic (EM) wave of PD using four loop sensors. As the distance between the sensor and PD source decreases, the peak to peak magnitude of the first wave of detected EM wave was found to increase using four sensors array. An attempt is made to locate PD source using output electromagnetic waves detected four loop sensors by the time of flight method. As a result, the present method is found to allow PD location with location identification error of 5 mm.

DOI： 10.1109/ICD.2016.7547640

Scopus

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84987898756&origin=inward

Effect of Permittivity Variation on Surface Flashover of GIS Epoxy Spacer Model in SF6 Gas Reviewed

International Conference on Dielectrics (ICD2016) ( 1-10 ) 96 - 99 2016.07

PD Properties and Gases Generated by Palm Fatty Acids Esters (PFAE) Oil Reviewed

International Conference on Dielectrics (ICD2016) ( 6-4 ) 816 - 819 2016.07

Simulation Analysis of Surface Current as TEV signal caused by Partial Discharge on Post Insulator in Bus Duct Reviewed

International Conference on Dielectrics (ICD2016) ( 5a-8 ) 480 - 484 2016.07

Impulse and Subsequent AC Partial Discharge Properties in Cast Resin Transformer Reviewed

International Conference on Dielectrics (ICD2016) ( 5a-2 ) 455 - 458 2016.07

Basic Study on Partial Discharge Location in Power Module Reviewed

International Conference on Dielectrics (ICD2016) ( 5a-1 ) 451 - 454 2016.07

Study on Streaming Electrification Properties of Palm Fatty Acid Ester (PFAE) Oil due to Aging Reviewed

International Conference on Dielectrics (ICD2016) ( 3b-4 ) 410 - 413 2016.07

　 PREV - NEXT 　

<KOZAKO Masahiro>

Papers - KOZAKO Masahiro