Updated on 2024/05/14

 
MATSUDA Kenji
 
Scopus Paper Info  
Total Paper Count: 0  Total Citation Count: 0  h-index: 5

Citation count denotes the number of citations in papers published for a particular year.

Affiliation
Faculty of Engineering Department of Mechanical and Control Engineering
Job
Professor
E-mail
メールアドレス
Laboratory
1-1 Sensui-cho, Tobata-ku, Kitakyushu-shi, Fukuoka
External link

Research Interests

  • Contact problem

  • Hardness Testing

  • Roughness

  • Coatings

  • Tribology

Undergraduate Education

  • 1985.03   Kyushu University   Faculty of Engineering   Graduated   Japan

Post Graduate Education

  • 1990.03   Kyushu University   Graduate School, Division of Engineering   Doctoral Program   Completed   Japan

Degree

  • Kyushu University  -  Doctor of Engineering   1990.03

Biography in Kyutech

  • 2020.04
    -
    2022.03
     

    Kyushu Institute of Technology   Faculty of Engineering  

  • 2008.04
     

    Kyushu Institute of Technology   Faculty of Engineering   Department of Mechanical and Control Engineering   Professor  

Biography before Kyutech

  • 1995.10 - 1996.07   Imperial College of Science, Technology and Medicine   Mechanical Engineering   United Kingdom

Papers

  • Real contact area and friction property of rubber with two-dimensional regular wavy surface Reviewed International journal

    Kenji Matsuda,Daisuke Hashimoto,Kenya Nakamura

    Tribology International   93   523 - 529   2016.01

     More details

    Authorship:Lead author, Corresponding author   Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1016/j.triboint.2014.11.011

    Scopus

  • The Causes of Asymmetric Deformation of Surface Roughness Asperities in Elastohydrodynamic Lubrication Contacts Reviewed International journal

    Kaneta M., Matsuda K., Nishikawa H.

    Journal of Tribology   144 ( 6 )   2022.06

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4052255

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85126812664&origin=inward

  • Effects of Thermal Properties of Contact Materials and Slide-Roll Ratio in Elastohydrodynamic Lubrication Reviewed International journal

    Kaneta M., Matsuda K., Nishikawa H.

    Journal of Tribology   144 ( 6 )   2022.06

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4053095

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85126984666&origin=inward

  • Effects of carbon content and hardness on rolling contact fatigue resistance in heavily loaded pearlitic rail steels Reviewed

    Ueda M., Matsuda K.

    Wear   444-445   2020.03

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1016/j.wear.2019.203120

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85077700738&origin=inward

  • Effect of specimen thickness on growth of real contact area of rubber with two-dimensional regular wavy surface Reviewed International journal

    124   184 - 194   2018.08

     More details

    Authorship:Lead author, Corresponding author   Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1016/j.triboint.2018.02.010

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85045391735&origin=inward

  • Influence of Stress Factor on Void Closure Reviewed

    MOURI Kengo, ARIMA Takeshi, FUKUYA Michiaki, MATSUDA Kenji

    Journal of the Japan Society for Technology of Plasticity ( The Japan Society for Technology of Plasticity )   59 ( 691 )   149 - 157   2018.01

     More details

    Authorship:Last author   Language:Japanese   Publishing type:Research paper (scientific journal)

    <p>In the 2nd report, the evaluation factors for void closure under the condition of multipass forging revealed that true strain <i>ε<sub>z</sub> </i> in the <i>z</i> direction is appropriate for the evaluation factors for void closure. However, although the effectiveness of the hydrostatic stress ratio <i>σ<sub>m </sub> </i>/<i>σ<sub>eq</sub> </i> for void closure was clear in the 1st report, the reasons were not clarified. In this paper, we investigated the effects of stress factors on void closure and its handling through numerical experiments. The following results were obtained. 1) By using the true stress in each direction, the deformation behavior of voids can be evaluated as a dimensional change of the diameter on the basis of the frictionless model. 2) In the <i>z</i> stroke direction, the void is easier to close than in the frictionless model when <i>σ<sub>z </sub> </i>/<i>σ<sub>eq</sub> </i> is -1 or less, and harder to close than in the frictionless model if not. 3) The void diameter in the <i>x</i> direction, <i>d<sub>x</sub> </i>, is smaller than in the frictionless model when <i>σ<sub>x </sub> </i>/<i>σ<sub>eq</sub> </i> is 0 or less, and larger than in the frictionless model if not. 4) When there is a void on the axis of symmetry, <i>σ<sub>m </sub> </i>/<i>σ<sub>eq</sub> </i> can be used to evaluate <i>ε<sub>z</sub> </i> for void closure and the dimensional change of <i>d<sub>x</sub> </i> . In addition, we clarified the influences of material size, void size, and mechanical properties of the material on void closure.</p>

    DOI: 10.9773/sosei.59.149

    CiNii Article

    CiNii Research

    Other Link: https://www.jstage.jst.go.jp/article/sosei/59/691/59_149/_pdf

  • Numerical Study on Method for Reducing Film Pressure and Its Fluctuation due to Surface Roughness in Elastohydrodynamic Lubrication Contact Reviewed International journal

    Journal of Tribology   145 ( 3 )   2023.03

     More details

    Authorship:Last author   Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4056189

    DOI: 10.1115/1.4056189

  • 「2列にお並びください」に秘められたメッセージ Invited

    松田 健次

    月刊トライボロジー ( 新樹社 )   36 ( 1 )   33 - 33   2022.01

     More details

    Authorship:Lead author, Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  • Numerical Study on the Interaction of Transverse and Longitudinal Roughness on Elastohydrodynamic Lubrication Contact Surfaces with Different Thermal Conductivities and Elastic Moduli Reviewed

    Kaneta M., Matsuda K., Wang J., Cui J., Yang P., Nishikawa H., Krupka I., Hart M.

    Journal of Tribology   143 ( 9 )   2021.09

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4049259

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85102411571&origin=inward

  • Numerical Study on Effect of Thermal Conductivity in Point Contacts with Longitudinal Roughness on Abnormal Pressure Distribution Reviewed International journal

    Kaneta M., Matsuda K., Wang J., Yang P.

    Journal of Tribology   142 ( 12 )   2020.12

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4047300

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85087104351&origin=inward

  • 昔を懐かしんで Invited

    松田健次

    月刊トライボロジー ( 新樹社 )   34 ( 8 )   11 - 11   2020.08

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  • Rebound Hardness Test and COVID-19 Problems

    MATSUDA Kenji

    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS ( Japanese Society of Tribologists )   65 ( 8 )   469 - 469   2020.08

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)

    DOI: 10.18914/tribologist.65.08_469

    CiNii Article

    Other Link: https://ci.nii.ac.jp/naid/130007887591

  • Numerical Study on Effect of Dimples on Tribo-Characteristics in Non-Newtonian Thermal Elastohydrodynamic Lubrication Point Contacts with Different Mechanical and Thermal Properties Reviewed

    Kaneta M., Matsuda K., Wang J., Yang P.

    Journal of Tribology   142 ( 4 )   2020.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1115/1.4045638

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85087102707&origin=inward

  • Verification of Effectiveness of Void Closure Evaluation Using True Strain by Actual Machine:―Study on Void Closure of Large Steel Ingot, 4th Report― Reviewed

    MOURI Kengo, ARIMA Takeshi, FUKUYA Michiaki, MATSUDA Kenji

    Journal of the Japan Society for Technology of Plasticity ( The Japan Society for Technology of Plasticity )   61 ( 709 )   40 - 47   2020.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    <p>Previous studies have shown that true strain is effective for evaluating void closure in multipass forging. However, the above-mentioned result was obtained by numerical simulation and an experiment using hot steel with a reduced-scale model having a spherical void, and it has not been confirmed whether it is effective with a real machine. Therefore, in this study, the effectiveness of using true strain was verified in real machine tests. The following conclusions were obtained. 1) In the ultrasonic test (UT) after the third forging, despite the equivalent strain applied to two steel ingots being the same, a large difference occurred in the defect distribution. From this result, it was clarified that the closing behavior of the void in actual machines under multipass forging cannot be evaluated using equivalent strain. 2) In the UT after the fourth forging, as a result of applying the same true strain to two steel ingots, the defects of both steel ingots almost disappeared and the results were the same. Therefore, it was clarified that the closing behavior of the void in actual machines under multipass forging can be evaluated using true strain.</p>

    DOI: 10.9773/sosei.61.40

    CiNii Article

    Other Link: https://ci.nii.ac.jp/naid/130007801670

  • New Development of Rebound Hardness Test Invited

    54 ( 12 )   791 - 797   2019.12

     More details

    Authorship:Lead author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)

  • Deformation of Rough Surfaces in Point EHL Contacts Reviewed

    67 ( 2 )   2019.06

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1007/s11249-019-1145-z

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85061788754&origin=inward

  • 空隙閉鎖に及ぼす応力因子の影響:―大型鋼塊の空隙閉鎖に関する研究 第3報― Reviewed

    毛利 健吾, 有馬 猛, 福谷 理明, 松田 健次

    塑性と加工   2018.08

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Effect of Sulfur to Molybdenum Composition Ratio on Friction and Wear Characteristics in Air of Sputtered Molybdenum Disulfide Films Reviewed

    MATSUZAKI Kazunari, SASAKI Iwao, SUNAHARA Kenji, IKEDA Michiaki, MATSUDA Kenji

    Journal of the Society of Materials Science, Japan   66 ( 9 )   675 - 681   2017.09

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    DOI: 10.2472/jsms.66.675

    Scopus

    CiNii Article

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85029738842&origin=inward

  • Evaluation Method for Mechanical Properties of Coatings using Vickers Hardness Test

    Kenji MATSUDA

    ( Shinjusha ) 31 ( 8 )   14 - 17   2017.08

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (trade magazine, newspaper, online media)

  • Fixing method of specimen for rebound hardness test of glass by using hammer with Vickers indenter Invited Reviewed

    Kenji Matsuda,Daichi Urakawa,Kota Fujiwara

    Journal of Material Testing Research Association of Japan   61 ( 2 )   79 - 85   2016.04

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

  • 九州学生会の活動(学生会だより)

    松田 健次

    日本機械学會誌 ( 一般社団法人日本機械学会 )   119 ( 1168 )   2016.03

     More details

    Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (other)

    CiNii Article

    Other Link: http://ci.nii.ac.jp/naid/110010047818

  • Mechanism of composition changing on RF sputtered films -Part 2-

    Matsuzaki Kazunari, Sasaki Iwao, Sunahara Kenji, Matsuda Kenji

    Abstract of annual meeting of the Surface Science of Japan ( The Japan Society of Vacuum and Surface Science )   36 ( 0 )   26   2016.01

     More details

    Authorship:Last author   Language:Japanese   Publishing type:Research paper (scientific journal)

    DOI: 10.14886/sssj2008.36.0_26

    CiNii Article

    CiNii Research

  • Theory of Contact and Texture - Random Rough Surface and Regular Wavy Surface -,"jointly worked"

    Kenji MATSUDA,Kenya NAKAMURA

    Journal of Japanese Society of Tribologists ( Japanese Society of Tribologists )   60 ( 3 )   171 - 176   2015.03

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)

  • Tribology Laboratory, Kyushu Institute of Technology

    MATSUDA Kenji

    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS ( Japanese Society of Tribologists )   60 ( 7 )   451 - 452   2015.01

     More details

    Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)

    DOI: 10.18914/tribologist.60.07_451

    CiNii Article

    Other Link: https://ci.nii.ac.jp/naid/130005529447

  • Effect of Positive Voltages to Substrate on Sulfur to Molybdenum Composition Ratio of of Sputtered Molybdenum Disulfide Films Reviewed

    Kazunari MATSUZAKI,Kiyonori KOGUMA,Iwao SASAKI,Michiaki IKEDA,Kenji MATSUDA

    Journal of Japanese Society of Tribologists   59 ( 9 )   569 - 576   2014.09

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Fundamental Phenomena -Introduction to Contact-

    Kenji Matsuda

    Journal of Japanese Society of Tribologists ( Japanese Society of Tribologists )   57 ( 3 )   137 - 138   2012.03

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (bulletin of university, research institution)

  • Fundamental phenomena - Introduction to contact

    Matsuda K.

    Toraibarojisuto/Journal of Japanese Society of Tribologists ( Toraibarojisuto/Journal of Japanese Society of Tribologists )   57 ( 3 )   137 - 138   2012.03

     More details

    Language:Japanese   Publishing type:Article, review, commentary, editorial, etc. (scientific journal)

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84861167947&origin=inward

  • Influence of Pressure-Viscosity Coefficient of Lubricant Oil on Dielectric Breakdown under the Condition of Elastohydrodynamic Lubrication Reviewed

    Kenji Sunahara,Yuji Ishida,Shinji Yamashita,Masaharu Yamamoto,Nobuyoshi Ohno,Hiroshi Nishikawa,Kenji Matsuda,Motohiro KANETA

    Journal of Japanese Society of Tribologists   56 ( 11 )   696 - 702   2011.11

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    CiNii Article

  • Preliminary Measurements of Electrical Micropitting in Grease-Lubricated Point Contacts Reviewed

    Kenji Sunahara,Yuji Ishida,Shinji Yamashita,Masaharu Yamamoto,Hiroshi Nishikawa,Kenji Matsuda,Motohiro Kaneta

    Tribology Transactions   54 ( 5 )   730 - 735   2011.05

     More details

    Language:English   Publishing type:Research paper (scientific journal)

    DOI: 10.1080/10402004.2011.597543

    Scopus

  • Pursuit of real contact area up to the complete contact-study on two-dimensional regular wavy surface of rubber under atmosphere and decompression environments- Reviewed

    Matsuda K., Okuda Y., Nakamura K.

    Toraibarojisuto/Journal of Japanese Society of Tribologists   55 ( 7 )   509 - 517   2010.09

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    The elastic contact of two-dimensional regular wavy surface with a flat surface is studied by using three types of blocks of silicone rubber as specimen. The effect of the surface profile on the growth of the real contact area is investigated from the first touch to the complete contact The experimental results show the formation of the percolation channels allowing the leakage of fluid and the dependence of the size of the contact area on the load are markedly affected by the shape of the valley of the wavy surface. In the case of the specimen with U-shaped trough, each contact spot touches the neighbors before complete contact, resulting in the extinction of the percolation channels. In this case, the real contact area linearly increases with the load if the real contact area approaches the complete contact On the other hand, in the case with V-shaped trough, the percolation channels could be hardly extinguished. The effect of the air entrapped between the contact surfaces is also discussed.

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956765859&origin=inward

  • Influence of argon pressure on friction and wear characteristics in air of sputtered molybdenum disulfide films Reviewed

    Matsuda K., Koguma K., Kaneta M., Ikeda M.

    Toraibarojisuto/Journal of Japanese Society of Tribologists   55 ( 6 )   406 - 412   2010.08

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    Sputtered molybdenum disulfide (MoS2) films having various densities, interplanar spacing and proportion of void were prepared on the surface of the rollers for cross roller bearing by varying argon gas pressure from 1.7 Pa to 6.7 Pa. After sputtering, dry air was introduced into the vacuum chamber, and then the rollers were exposed in air atmosphere. The effect of the introduction of dry air into the vacuum chamber on the friction and the wear life of the MoS2 films have been investigated by the friction test conducted in air atmosphere where the humidity is controlled. It is found that the effect of the introduction of dry air into the vacuum chamber varies depending on the argon gas pressure. The film prepared by an argon gas pressure of 4.0 Pa, which has a higher true density and a lower (00·2) interplanar spacing, shows the most significant improvement of the tribological performance. It is also found that even a 4.0 Pa film shows a sharp drop of wear life when storage period of the test piece in air of 30% relative humidity exceeds 50 days.

    Scopus

    Other Link: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77955632257&origin=inward

  • 全面接触に至るまでの真実接触面積の追跡― ゴムを用いた大気圧および減圧下における二次元規則性凹凸面の検討 ― Reviewed

    松田健次,奥田洋三,中村研八

    トライボロジスト   55 ( 7 )   509 - 517   2010.07

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

    主要雑誌 代表的研究業績

  • 二硫化モリブデンスパッタ膜の大気中での摩擦摩耗特性に及ぼすアルゴン分圧の影響―膜形成後の真空チャンバ内への乾燥空気導入効果― Reviewed

    松田健次,小熊清典,兼田楨宏,池田満昭

    トライボロジスト   55 ( 6 )   406 - 412   2010.06

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

    主要雑誌

  • 二硫化モリブデンスパッタ膜の大気中での摩擦摩耗特性-膜形成後の真空チャンバ内への乾燥ガス導入効果- Reviewed

    松田健次,小熊清典,兼田楨宏,池田満昭

    トライボロジスト   54 ( 12 )   857 - 864   2009.12

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

  • 全面接触に至るまでの真実接触面積と微小空隙の追跡― 可視化装置による一次元規則性凹凸面の検討 ― Reviewed

    松田健次,廣松伸晃,中村研八

    トライボロジスト   54 ( 8 )   553 - 560   2009.08

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

    主要雑誌 代表的研究業績

  • 一次元規則性粗さの全面接触弾性解析 Reviewed

    松田健次,廣松伸晃,中村研八

    トライボロジスト   54 ( 3 )   192 - 200   2009.03

     More details

    Authorship:Corresponding author   Language:Japanese   Publishing type:Research paper (scientific journal)

    主要雑誌 代表的研究業績

  • Development of Grease Film Breakdown Observing Device Reviewed

    Kenji Sunahara,Shinji Yamashita,Masaharu Yamamoto,Michiaki Ikeda,Hiroshi Nishikawa,Kenji Matsuda and Motohiro Kaneta

    Tribology Online   3 ( 2 )   40 - 43   2008.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • Effects of Substrate and Friction on Vickers Indentation of Electroplated Coatings Reviewed

    Journal of Physics D: Applied Physics   41 ( 7 )   074018.1 - 8   2008.04

     More details

    Authorship:Corresponding author   Language:English   Publishing type:Research paper (scientific journal)

  • Thermal-desorption Behavior of MoS2-xOx Solid-Lubricant Films Suputtered on Bearing Rollers Reviewed

    K.Koguma,M.Ikeda,N.Ota,K.Matsuda,M.Kaneta

    J. Vacuum Science and Technology   25 ( 2 )   324 - 329   2007.02

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • 密度の異なる二硫化モリブデン膜を積層した二層膜の摩擦寿命と密着性に及ぼす大気中保管の影響 Reviewed

    小熊清典,池田満昭,松田健次,兼田楨宏

    トライボロジスト   52 ( 1 )   75 - 81   2007.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 二硫化モリブデン固体潤滑軸受の真空中での寿命と二硫化モリブデン膜被覆ローラの大気中での摩擦寿命-大気曝露時の湿度と試験環境での保持時間の影響- Reviewed

    小熊清典,池田満昭,砂原賢治,松田健次,兼田楨宏

    トライボロジスト   52 ( 1 )   90 - 94   2007.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 二硫化モリブデンスパッタ膜の酸素濃度とS/Mo比のEPMA分析値に及ぼす分析装置内での保持時間の影響 Reviewed

    小熊清典,池田満昭,大田暢彦,松田健次,兼田楨宏

    トライボロジスト   51 ( 12 )   913 - 920   2006.12

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • SUS440C製ローラ上に形成した二硫化モリブデンスパッタ膜の大気中におけるすべり摩擦機構 Reviewed

    小熊清典,池田満昭,砂原賢治,松田健次,兼田楨宏

    トライボロジスト   51 ( 11 )   835 - 842   2006.11

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Effects of soot on wear in elastohydrodynamic lubrication contacts Reviewed

    M. Kaneta,T. Irie,H. Nishikawa,K. Matsuda

    Proc. IMechE, Journal of Engineering Tribology   220   307 - 317   2006.06

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • カーボン分散超鋼合金がメカニカルシールリングのしゅう動特性に及ぼす効果 Reviewed

    坂本竜一,松尾明,今里州一,村上清人,松田健次,兼田楨宏

    粉体および粉末冶金   53 ( 5 )   441 - 446   2006.05

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Behaviour of Transverse Ridges Passing Through a Circular EHL Conjunction Reviewed

    M. Kaneta,H. Nishikawa,K. Matsuda

    IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics,Solid Mechanics and Its Applications Vol.134   134 ( 707 )   189 - 200   2006.01

     More details

    Language:English   Publishing type:Research paper (other academic)

  • ローラに被覆した二硫化モリブデンスパッタ膜の寿命に及ぼす結晶配向性の影響 Reviewed

    砂原賢治,池田満昭,松田健次,兼田楨宏

    日本機械学会論文集,C編   71 ( 707 )   2378 - 2383   2005.07

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 大気中におけるMoS2スパッタ膜の局部腐食 Reviewed

    小熊清典,池田満昭,加来久幸,松田健次,兼田楨宏

    トライボロジスト   50 ( 7 )   546 - 552   2005.07

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 反応性スパッタ法でローラ上に形成したMo-S-O膜の酸素含有量と潤滑特性の関係 Reviewed

    小熊清典,池田満昭,砂原賢治,松田健次,兼田楨宏

    トライボロジスト   416 ( 423 )   82 - 89   2005.05

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • SUS440C製ローラに被覆したMoS2スパッタ膜の摩擦寿命 Reviewed

    小熊清典,池田満昭,砂原賢治,松田健次,兼田楨宏

    トライボロジスト   50 ( 1 )   82 - 89   2005.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • ショア硬さ試験におけるハンマ振動の解析 Reviewed

    松田健次,藤榮淳

    日本機械学会論文集,A編   70 ( 700 )   1741 - 1746   2004.12

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 二硫化モリブデンスパッタ膜の性状に及ぼすアルゴン分圧の影響 Reviewed

    砂原賢治,池田満昭,村岡善之,松田健次,兼田楨宏

    日本機械学会論文集,C編   70 ( 692 )   1207 - 1212   2004.04

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Linear strain hardening in elastoplastic indentation contact Reviewed

    M. Sakai,T. Akatsu,S. Numata,K. Matsuda

    Journal of Materials Research   18 ( 9 )   2087 - 2096   2003.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • Prediction of Stress-Strain Curves of Elastic-Plastic Materials Based on the Vickers Indentation Reviewed

    Philosophical Magazine A   82 ( 10 )   1941 - 1941   2002.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • 超硬合金摺動面の微細き裂発生機構 Reviewed

    松田健次,今里州一,徳本啓,兼田楨宏

    粉体および粉末冶金   48 ( 4 )   322 - 327   2001.04

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    代表的研究業績

  • 有限要素法によるショア硬さの解析 Reviewed

    松田健次,兼田もと宏

    日本機械学会論文集(A編)   66 ( 652 )   2113 - 2121   2000.12

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    代表的研究業績

  • Shallow Cracks on Rubbing Surface of Cemented Carbide Reviewed

    K.Tokumoto,S.Imasato,S.Sakaguchi,K.Matsuda,M.Kaneta

    Proceedings 2000 Powder Metallurgy World Congress Part 2   1609 - 1612   2000.11

     More details

    Language:English   Publishing type:Research paper (international conference proceedings)

    Japan   京都   2000.11.12  -  2000.11.16

  • Rebound Hardness of Electroplated Coatings Reviewed

    K.Matsuda,M.Kaneta

    Thinning Films and Tribological Interfaces(Proceedings of 26th Leeds-Lyon Symposium on Tribology)   163 - 172   1999.09

     More details

    Language:English   Publishing type:Research paper (other academic)

    イギリス   リーズ   1999.09.14  -  1999.09.17

  • メカニカルシール超硬合金しゅう動リングのき裂発生機構(第3報,熱弾塑性解析による諸因子の評価) Reviewed

    松田健次,縄本大綱,兼田楨宏,今里州一,徳本啓

    日本機械学会論文集(C編)   65 ( 631 )   1193 - 1200   1999.03

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Cause of Unsuccessful Results of Miner's Rule: Behavior of Small Fatigue Crack Growth under Repeated Two-Step Loadings Reviewed

    Y.murakami,K.Matsuda

    Proceeding of Small Fatigue Cracks: Mechanics and Mechanisms, Elsevier Science Ltd   119 - 130   1998.12

     More details

    Language:English   Publishing type:Research paper (other academic)

    アメリカ   Hawaii   1998.12.06  -  1998.12.11

  • A Possible Mechanism for Rail Dark Spot Defects Reviewed

    M.Kaneta,K.Matsuda,K.Murakami,H.Nishikawa

    Transactions of the ASME, Journal of Tribology   120 ( 2 )   304 - 304   1998.04

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • Threshold Stress for Fatigue Crack Initiation from a Small Crack Reviewed

    Y.Murakami,K.Matsuda

    Proceeding of Fatigue 87, 3rd International Conference on Fatigue and Fatigue Threshold   1   119 - 130   1997.04

     More details

    Language:English   Publishing type:Research paper (international conference proceedings)

    アメリカ   Hawaii   1997.04  -  1997.04

  • Analysis of the Vickers hardness of electroplated coatings Reviewed

    K.Matsuda,M.Kaneta

    Philosophical Magazine A   74 ( 5 )   1171 - 1171   1996.10

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • Abnormal Phenomena Appearing in EHL Contacts Reviewed

    M.Kaneta,H.Nishikawa,T.Kanada,K.Matsuda

    Transactions of the ASME, Journal of Tribology   118 ( 4 )   886 - 886   1996.10

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • メカニカルシール超硬合金しゅう動リングの亀裂発生機構(第2報、理論的考察) Reviewed

    松田健次,松井伸悟,久我栄誉,兼田楨宏

    日本機械学会論文集(C編)   61 ( 589 )   3678 - 3684   1995.09

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

    代表的研究業績

  • Behavior of EHL Films in Cyclic Squeeze Motion Reviewed

    H.Nishikawa,K.Handa,K.Teshima. K.Matsuda,M.Kaneta

    JSME International Journal, Series C   38 ( 3 )   577 - 585   1995.09

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • メカニカルシール超硬合金しゅう動リングの亀裂発生機構(第1報、亀裂発生に及ぼす諸因子の影響) Reviewed

    松井伸悟,藤井謙太郎,松田健次,兼田もと宏

    日本機械学会論文集(C編)   61 ( 589 )   3672 - 3677   1995.09

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • レールダークスポットの再現 Reviewed

    M.Kaneta,K.Matsuda,K.Murakami,H.Nishikawa,K.Sugino

    日本機械学会論文集(C編)   61 ( 588 )   3402 - 3409   1995.08

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Analysis of Vickers Hardness by the Finite Element Method Reviewed

    Y.Murakami,K.Matsuda

    Transactions of the ASME, Journal of Applied Mechanics   61 ( 4 )   822 - 828   1994.12

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • Experimental and Analytical Study on Thermocracking of Alumina Ceramic Ring in a Mechanical Seal Reviewed

    M.Komiya,K.Matsuda,M.Kaneta

    Tribology Transactions   37 ( 2 )   245 - 245   1994.07

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • メカニカルシールにおけるアルミナしゅう動リングのき裂発生機構(第2報、き裂発生熱応力と曲げ強度との関係) Reviewed

    小宮誠,松田健次,兼田もと宏

    日本機械学会論文集(C編)   60 ( 569 )   231 - 238   1994.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 体積力法による屈曲き裂・分岐き裂の新解析法 Reviewed

    森和也,B.Tabarrok,野田尚昭,松田健次

    日本機械学会論文集(A編)   59 ( 567 )   2524 - 2530   1993.11

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 周期スクイズ運動下におけるEHL膜の挙動 Reviewed

    西川宏志,半田孝太郎,手嶋邦治,松田健次,兼田楨宏

    日本機械学会論文集(C編)   59 ( 561 )   1496 - 1503   1993.06

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Friction and wear properties of titanium films formed on aluminium by laser thermal spraying Reviewed

    M.Kaneta,K.Matsuda,J.Matsuda,A.Utsumi

    Wear   156   161 - 172   1992.07

     More details

    Language:English   Publishing type:Research paper (scientific journal)

  • メカニカルシールにおけるアルミナしゅう動リングのき裂発生機構 Reviewed

    小宮誠,松田健次,兼田楨宏

    日本機械学会論文集(C編)   58 ( 551 )   2171 - 2177   1992.07

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • メカニカルシールにおけるセラミックしゅう動リングの熱衝撃破壊 Reviewed

    小宮誠,松田健次,兼田楨宏

    日本機械学会論文集(C編)   58 ( 548 )   1197 - 1202   1992.04

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 7:3黄銅の2段繰返し試験におけるき裂伝ぱ挙動と累積疲労損傷値の変動 Reviewed

    松田健次,村上敬宜,篠崎茂

    材料   41 ( 460 )   74 - 79   1992.01

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 有限要素法によるビッカース硬さの解析 Reviewed

    Y.Murakami,K.Matsuda

    日本機械学会論文集(A編)   57 ( 539 )   1665 - 1673   1991.07

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 硬さを変えた高強度鋼の疲労強度に及ぼす介在物および微小表面ピットの影響 Reviewed

    大小森義洋,北川幾次郎,篠塚啓吾,鳥山寿之,村上敬宜,松田健次

    鉄と鋼   77 ( 3 )   438 - 445   1991.03

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Effects of Nonmetallic Inclusions and Small Surface Pits on the Fatigue Strength of a High Strength Steel at Two Hardness Levels Reviewed

    Y.Ohkomori,I.Kitagawa,K.Shinozuka,K.Matsuda,Y.Murakami

    Proceedings of 32nd Mechanical Working and Steel Processing Conference   1 - 9   1990.10

     More details

    Language:English   Publishing type:Research paper (international conference proceedings)

    アメリカ   Cincinnati   1990.10.21  -  1990.10.24

  • 7:3黄銅の微小き裂からのき裂進展下限界値に及ぼすき裂寸法の影響について Reviewed

    村上敬宜,松田健次

    日本機械学会論文集(A編)   56 ( 525 )   1123 - 1132   1990.05

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • Effects of Nonmetallic Inclusions and Corrosion Pits on the Fatigue Strength of a High Strength Steel Reviewed

    Y.Murakami,K.Matsuda,Y.Ohkomori,I.Kitagawa,K.Shinozuka

    Proceedings of International Conference on Evaluation of Materials Performance in Severe Environments,(EVALMAT 89)   143 - 150   1989.11

     More details

    Language:English   Publishing type:Research paper (international conference proceedings)

    神戸   1989.11.20  -  1989.11.23

  • 2段多重繰返し試験における微小き裂の挙動と累積疲労損傷値の変動 Reviewed

    村上敬宜,松田健次

    材料   38 ( 433 )   1188 - 1193   1989.10

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 過小応力を含む2段繰返し疲労試験の寿命予測における微小き裂の役割 Reviewed

    村上敬宜,松田健次

    材料   36 ( 409 )   1065 - 1070   1987.10

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 微小き裂からき裂が発生するための限界応力 Reviewed

    村上敬宜,松田健次

    日本機械学会論文集(A編)   53 ( 489 )   871 - 877   1987.06

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

  • 下限界応力拡大係数Δkthに及ぼすき裂寸法と材質の影響 Reviewed

    村上敬宜,松田健次

    日本機械学会論文集(A編)   52 ( 478 )   1492 - 1499   1986.06

     More details

    Language:Japanese   Publishing type:Research paper (scientific journal)

▼display all

Publications (Books)

  • Tribology Design Manual

    Akio Nitanai, et. al.(Joint author)

    Technosystem Co.,Ltd.  2015.05  ( ISBN:978-4-9247-2873-8

     More details

    Language:Japanese

Conference Prsentations (Oral, Poster)

  • Real Contact Area and Friction Property of Rubber with Two-Dimensional Regular

    41st LEEDS-LYON SYMPOSIUM on TRIBOLOGY 

     More details

    Event date: 2014.09.02 - 2014.09.05   Language:English  

  • Rebound Hardness Testing by Using Hammer with Pyramidal Indenter - Effect of Reducing the Impact Force on Restitution Coefficient

    Fifth International Indentation Workshop 

     More details

    Event date: 2015.11.01 - 2015.11.05   Language:English  

  • Effect of Specimen Thickness on Growth of Real Contact Area of Rubber with Two-Dimensional Regular Wavy Surface

    44th LEEDS-LYON SYMPOSIUM on TRIBOLOGY 

     More details

    Event date: 2017.09.04 - 2017.09.06   Language:English  

  • Rebound Hardness Testing by Using Hammer with Pyramidal Indenter - Effect of Substrate on Restitution Coefficient of Coatings -

    6th International Indentation Workshop 

     More details

    Event date: 2018.07.01 - 2018.07.06   Language:English  

  • Effect of Poisson's Ratio on Elastic Contact of One-Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference, Fukui, November 2022  2022.11 

     More details

    Event date: 2022.11.09 - 2022.11.11   Language:Japanese   Country:Japan  

  • Comparison of the dynamic behavior of hammer with pyramidal indenter under the rebound hardness test for two kinds of glass

    Proceedings of JAST Tribology Conference, Fukui, November 2022  2022.11 

     More details

    Event date: 2022.11.09 - 2022.11.11   Language:Japanese   Country:Japan  

    The rebound behaviors of hammers for two kinds of glass with different mechanical properties were compared. The reasons for the variation and discrete of restitution coefficients were discussed in terms of fracture cracks and fracture toughness values measured by the IF method.

  • The effect of presence or absence of a screw for fixing specimen on rebound hardness test by using hammer with Vickers indenter

    Proceedings of JAST Tribology Conference, Fukui, November 2022  2022.11 

     More details

    Event date: 2022.11.09 - 2022.11.11   Language:Japanese   Country:Japan  

  • Damage Growth Behavior due to Electrical Pitting by Rolling Contact Fatigue Testing Machine

    Proceedings of JAST Tribology Conference, Fukui, November 2022  2022.11 

     More details

    Event date: 2022.11.09 - 2022.11.11   Language:Japanese   Country:Japan  

  • Pursuit of the pitch of ridge marks by rolling contact test using a single ball

    Proceedings of JAST Tribology Conference, Fukui, November 2022  2022.11 

     More details

    Event date: 2022.11.09 - 2022.11.11   Language:Japanese   Country:Japan  

  • Rebound hardness test of glass by using hammer with pyramidal indenter

    Proceedings of JAST Tribology Conference, Tokyo, May 2022  2022.05 

     More details

    Event date: 2022.05.23 - 2022.05.25   Language:Japanese   Country:Japan  

  • Effects of Specimen Thickness and Substrate on Gap between Contact Surfaces —Study on One-Dimensional Regular Wavy Surface by In-Line Laser Profilometer—

    Proceedings of JAST Tribology Conference, Tokyo, May 2022  2022.05 

     More details

    Event date: 2022.05.23 - 2022.05.25   Language:Japanese   Country:Japan  

  • Effects of Substrate and Specimen Thickness on the Real Contact Area of Combined Regular Wavy Surface (Part 2) -Elastic Contact Analysis by the Finite Element Method-

    Proceedings of JAST Tribology Conference, Matsue, November 2021 

     More details

    Event date: 2021.10.27 - 2021.10.29   Language:Japanese  

  • Effects of Substrate and Specimen Thickness on Friction Property of Two-Dimensional Regular

    Proceedings of JAST Tribology Conference, Matsue, November 2021 

     More details

    Event date: 2021.10.27 - 2021.10.29   Language:Japanese  

  • Influence of Hammer Tilt on Rebound Hardness Measurement using Pyramidal Indenter (Part 2) -Analysis of Hammer Motion by the Finite Element Method-

    Proceedings of JAST Tribology Conference, Matsue, November 2021 

     More details

    Event date: 2021.10.27 - 2021.10.29   Language:Japanese  

  • Influence of Hammer Tilt on Rebound Hardness Measurement using Pyramidal Indenter (Part 1) -Pursuit of Motion of Hammers with Different Pyramidal Indenters-

    Proceedings of JAST Tribology Conference, Matsue, November 2021 

     More details

    Event date: 2021.10.27 - 2021.10.29   Language:English  

    In this study, 3 hammers with different pyramidal indenters are used to carry out the rebound hardness test within 4° tilt angle. Effects of the tilt angle of hammer on coefficient of restitution and energy conversion of the rebound system are revealed
    experimentally, which provides a test basis for the effectiveness of the new rebound hardness test.

  • Effects of Substrate and Specimen Thickness on the Real Contact Area of Combined Regular Wavy Surface

    Proceedings of JAST Tribology Conference Tokyo, May 2021 

     More details

    Event date: 2021.05.24 - 2021.05.26   Language:Japanese  

  • Composite oxide material La2-xSrxCuO4 for solid lubricant applications

    Proceedings of JAST Tribology Conference Tokyo, May 2021 

     More details

    Event date: 2021.05.24 - 2021.05.26   Language:Japanese  

  • Effects of Substrate and Specimen Thickness on the Real Contact Area of Two Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Beppu, November 2020 

     More details

    Event date: 2020.11.11 - 2020.11.13   Language:Japanese  

  • 四角錐圧子を有するハンマの反発係数に及ぼすハンマ傾斜角の影響

    村上渉, 松田健次

    日本金属学会研究会No.82" 微小領域の力学特性評価とマルチスケ ールモデリング" 2019  日本金属学会

     More details

    Event date: 2019.11.08 - 2019.11.10   Language:Japanese  

    ハンマが試料に衝突する際のハンマ傾斜角の影響に着目した。対面角が136°から172°のダイヤモンド四角錐圧子を有する4種のハンマを用いて,試料との衝突時の鉛直方向からのハンマの傾斜角と反発係数の関係を調査した。その結果,対面角136°の場合には傾斜角の影響は比較的小さいのに対し,対面角が増加すると,傾斜角が増加するにつれて反発係数は増加し,その傾向は対面角が大きいほど大きくなることを明らかにした。また,この原因についても検討を行った。

  • 反発式硬さ試験法の可能性と課題

    松田健次

    日本金属学会研究会No.82" 微小領域の力学特性評価とマルチスケ ールモデリング" 2019  日本金属学会

     More details

    Event date: 2019.11.08 - 2019.11.10   Language:Japanese  

    レーザドップラー振動計を用いたハンマ反発挙動の測定結果から得られた興味深い現象を紹介するとともに,微小領域の力学的特性評価に向けた取り組みと,解決すべき課題について議論する.

  • Effects of Oil Film Thickness and Apex Angle of Hammer Tip on the Restitution Coefficient of Lubricated Surface

    K. Shinbara, K. Matsuda

    International Tribology Conference, Sendai 2019 

     More details

    Event date: 2019.09.17 - 2019.09.21   Language:English  

  • Interference Effect of Large and Small Grooves on the Real Contact Area Growth of One-Dimensional Regular Wavy Surface

    46th LEEDS-LYON SYMPOSIUM on TRIBOLOGY 

     More details

    Event date: 2019.09.02 - 2019.09.04   Language:English  

  • Interference Effect of Two Kinds of Large and Small Valleys on the Growth of Real Contact Area of One-Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Tokyo, May 2019 

     More details

    Event date: 2019.05.20 - 2019.05.22   Language:Japanese  

  • Effect of Specimen Thickness on the Growth of Real Contact Area (Part 5) - Study on Block of Rubber with One-Dimensional Regular Wavy Surface having Alternating Large and Small Valleys -

    Proceedings of JAST Tribology Conference Tokyo, May 2019 

     More details

    Event date: 2019.05.20 - 2019.05.22   Language:Japanese  

  • Effect of Apex Angle of Hammer Tip on the Restitution Coefficient of Lubricated Surface

    Proceedings of JAST Tribology Conference Ise, November 2018 

     More details

    Event date: 2018.11.07 - 2018.11.09   Language:Japanese  

  • Effects of Specimen Thickness and Friction between Contact Surfaces on Real Contact Area Growth of Two-Dimensional Regular Wavy Surface

    45th LEEDS-LYON SYMPOSIUM on TRIBOLOGY 

     More details

    Event date: 2018.09.04 - 2018.09.07   Language:English  

  • Effect of Apex Angle on the Restitution Coefficient of Hammer with Pyramidal Indenter

    6th International Indentation Workshop 

     More details

    Event date: 2018.07.01 - 2018.07.06   Language:English  

  • Effects of Specimen Thickness and Friction on the Growth of Real Contact Area -Study on Infinitely Repeated Two-Dimensional Regular Wavy Surface by Elastic Contact Analysis-

    Proceedings of JAST Tribology Conference Tokyo, May 2018 

     More details

    Event date: 2018.05.21 - 2018.05.23   Language:Japanese  

  • Consideration of Rule to Determine Pitch of Washboard/Fluting (W/F) Pattern due to Electrical Pitting: Similarities between W/F Pattern and Turing Pattern

    Proceedings of JAST Tribology Conference Tokyo, May 2018 

     More details

    Event date: 2018.05.21 - 2018.05.23   Language:Japanese  

  • Formation of Washboard/Fluting (W/F) Pattern due to Electrical Pitting: Identification of Discharge Points in the Very Early Stage of Endurance Test

    Proceedings of JAST Tribology Conference Tokyo, May 2018 

     More details

    Event date: 2018.05.21 - 2018.05.23   Language:Japanese  

  • Formation of Washboard/Fluting (W/F) Pattern due to Electrical Pitting Using Switching Power Supply

    Proceedings of JAST Tribology Conference Tokyo, May 2018 

     More details

    Event date: 2018.05.21 - 2018.05.23   Language:Japanese  

  • Effect of Small Hole Filled with Resin on Rolling Contact Fatigue Life of High Strength Steel

    Proceedings of JAST Tribology Conference Takamatsu, November 2017 

     More details

    Event date: 2017.11.15 - 2017.11.18   Language:Japanese  

  • Effects of Indenter Shape and Falling Height on Restitution Coefficient of Lubricated Surface

    Proceedings of JAST Tribology Conference Takamatsu, November 2017 

     More details

    Event date: 2017.11.15 - 2017.11.18   Language:Japanese  

  • Elasto-Plastic Analysis of the Contact of One-Dimentional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Takamatsu, November 2017 

     More details

    Event date: 2017.11.15 - 2017.11.18   Language:Japanese  

  • Effect of Specimen Thickness on Variation of Cavity between Contact Surfaces -Study on Infinitely Repeated Two-Dimensional Regular Wavy Surface by Elastic Contact Analysis-

    Proceedings of JAST Tribology Conference Takamatsu, November 2017 

     More details

    Event date: 2017.11.15 - 2017.11.18   Language:Japanese  

  • Effect of Specimen Thickness on the Friction Property of Two-Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Tokyo, May 2017 

     More details

    Event date: 2017.05.15 - 2017.05.17   Language:Japanese  

  • Effect of Specimen Thickness on the Growth of Real Contact Area (Part 4) - Comparison between Blocks of Rubber with Two-Dimensional Regular Wavy Surface -Contact Analysis-

    Proceedings of JAST Tribology Conference Tokyo, May 2017 

     More details

    Event date: 2017.05.15 - 2017.05.17   Language:Japanese  

  • Effect of Specimen Thickness on the Growth of Real Contact Area (Part 3) - Elastic Contact Analysis of Block with Two-Dimensional Regular Wavy Surface -

    Proceedings of JAST Tribology Conference Nigata, October 2016 

     More details

    Event date: 2016.10.12 - 2016.10.14   Language:Japanese  

  • Real Contact Area and Friction Property of Rubber with Regular Wavy Surface

    Proceedings of JAST Tribology Conference Nigata, October 2016 

     More details

    Event date: 2016.10.12 - 2016.10.14   Language:Japanese  

  • Effect of lubrication regime on washboard/fluting pattern formation due to electrical pitting

    43rd LEEDS-LYON SYMPOSIUM on TRIBOLOGY 

     More details

    Event date: 2016.09.06 - 2016.09.09   Language:English  

  • Effect of Specimen Thickness on the Growth of Real Contact Area (Part 2) - Study on Block of Rubber with Two-Dimensional Regular Wavy Surface -

    Proceedings of JAST Tribology Conference Tokyo, May 2016 

     More details

    Event date: 2016.05.23 - 2016.05.25   Language:Japanese  

  • Effect of Specimen Thickness on the Growth of Real Contact Area (Part1) -Study on Infinitely Repeated Two-Dimensional Regular Wavy Surface by Elastic Contact Analysis-

    Proceedings of JAST Tribology Conference Tokyo, May 2016 

     More details

    Event date: 2016.05.23 - 2016.05.25   Language:Japanese  

  • Fixing method of specimen for rebound hardness test of glass by using hammer with Vickers indenter

     More details

    Event date: 2016.05.09   Language:Japanese  

  • Mechanism of composition changing on RF sputtered films -Part 2-

    Matsuzaki Kazunari, Sasaki Iwao, Sunahara Kenji, Matsuda Kenji

    Abstract of annual meeting of the Surface Science of Japan 

     More details

    Event date: 2016.01   Language:Japanese  

    CiNii Article

  • Rebound Hardness Test for Lubricated Surface by Using Spherical and Pyramidal Indenters

    International Tribology Conference, Tokyo 2015 

     More details

    Event date: 2015.09.16 - 2015.09.20   Language:English  

  • Comparison of Real Contact Area of Two-Dimensional Regular Wavy Surface with Different Pitch and Height

    Proceedings of JAST Tribology Conference Himeji, May 2015 

     More details

    Event date: 2015.05.27 - 2015.05.29   Language:Japanese  

  • Effect on Friction Property of Asperity Aspect Ratio of Two-Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Himeji, May 2015 

     More details

    Event date: 2015.05.27 - 2015.05.29   Language:Japanese  

  • Preventive Method of Electrical Pitting Using Lubricant

    Czech-Japan Tribology Workshop 

     More details

    Event date: 2014.11.24 - 2014.11.27   Language:English  

  • Rebound hardness testing by using hammer with sharp indenter - Effect of Reducing the Impact Force on Restitution Coefficient -

    Proceedings of JAST Tribology Conference Tokyo, May 2014 

     More details

    Event date: 2014.05.19 - 2014.05.21   Language:Japanese  

  • Real Contact Area and Friction Property of Spherical and Regular Wavy Surfaces

    Proceedings of JAST Tribology Conference Tokyo, May 2014 

     More details

    Event date: 2014.05.19 - 2014.05.21   Language:Japanese  

  • Effect of Small Hole Depth on Rolling Contact Fatigue Life of High Strength Steel

    Proceedings of JAST Tribology Conference Tokyo, May 2014 

     More details

    Event date: 2014.05.19 - 2014.05.21   Language:Japanese  

  • Effect of S/Mo Ratio on Lubrication Properties in Air of MoSX Sputtered Films

    Proceedings of JAST Tribology Conference Tokyo, October 2013 

     More details

    Event date: 2013.10.23 - 2013.10.25   Language:Japanese  

  • Effect of Positive Bias Voltages on Composition of MoSx Sputtered Films

    Proceedings of JAST Tribology Conference Tokyo, October 2013 

     More details

    Event date: 2013.10.23 - 2013.10.25   Language:Japanese  

  • Effect of S/Mo Ratio on Friction and Wear Characteristics in Air of Molybdenum Disulfide Sputtered Films

    The 5th World Tribology Congress, WTC V 

     More details

    Event date: 2013.09.08 - 2013.09.13   Language:English  

  • PURSUIT OF REAL CONTACT AREA UP TO THE COMPLETE CONTACT - Study on Regular Wavy Surface of Rubber under Various Environments -

    Second International Symposium on Engineering Mechanics and Its Applications 

     More details

    Event date: 2013.08.29 - 2013.08.31   Language:English  

  • Endurance Test of Actual Motor Using Greases with Electrical Pitting Resistance

    Proceedings of JAST Tribology Conference Tokyo, May 2013 

     More details

    Event date: 2013.05.20 - 2013.05.22   Language:Japanese  

  • Damage Growth Behavior by Electrical Pitting

    Proceedings of JAST Tribology Conference Tokyo, May 2013 

     More details

    Event date: 2013.05.20 - 2013.05.22   Language:Japanese  

  • Effects of sputtering gas element on crystal lattice parameters of sputtered transition metal sulfide films

     More details

    Event date: 2013.03.26 - 2013.03.29   Language:Japanese  

  • Effect of S/Mo ratio on friction and wear characteristics in air of molybdenum disulfide sputtered films

    Matsuzaki K., Sasaki I., Ikcda M., Matsuda K.

    5th World Tribology Congress, WTC 2013 

     More details

    Event date: 2013.01.01   Language:English  

  • Effect of Argon Pressure and Bias Voltage on Properties of Sputtered Niobium Sulfide Films

    M&M2012 Materials and Mechanics Conference 

     More details

    Event date: 2012.09.21 - 2012.09.24   Language:Japanese  

  • Rebound hardness testing by using hammer with sharp indenter - Effect of substrate on restitution coefficient -

    Proceedings of JAST Tribology Conference Muroran, Hokkaido, September 2012 

     More details

    Event date: 2012.09.16 - 2012.09.18   Language:Japanese  

  • Real Contact Area and Friction Property of Two-Dimensional Regular Wavy Surface under Wet Condition

    Proceedings of JAST Tribology Conference Muroran, Hokkaido, September 2012 

     More details

    Event date: 2012.09.16 - 2012.09.18   Language:Japanese  

  • Effects of Bias Voltage and Substrate on Properties of MoS2 Sputtered Film

    Proceedings of JAST Tribology Conference Tokyo, May 2012 

     More details

    Event date: 2012.05.14 - 2012.05.16   Language:Japanese  

  • Lubrication properties of MoS2 sputtered films fabricated by various bias voltages

    Proceedings of JAST Tribology Conference Tokyo, May 2012 

     More details

    Event date: 2012.05.14 - 2012.05.16   Language:Japanese  

  • Pursuit of Real Contact Area up to the Complete Contact - Comparing Two-Dimensional Regular Wavy Surface of Rubber under Atmosphere, Decompression and Wet Environments -

    International Tribology Conference Hiroshima 2011 

     More details

    Event date: 2011.10.30 - 2011.11.03   Language:English  

  • Effect of Bias Voltage on Properties of Sputtered Molybdenum Disulfide Films

    M&M2011 Materials and Mechanics Conference 

     More details

    Event date: 2011.07.15 - 2011.07.18   Language:Japanese  

  • Rebound Hardness Testing by Using Hammer with Vickers Indenter

    International Indentation Workshop 4 

     More details

    Event date: 2011.07.03 - 2011.07.08   Language:English  

  • Behavior of EHL Films in Squeeze Motion

    Proceedings of JAST Tribology Conference Tokyo, May 2011 

     More details

    Event date: 2011.05.23 - 2011.05.25   Language:Japanese  

  • Elastic Analysis of the Complete Contact of Two-Dimensional Regular Wavy Surface

    Proceedings of JAST Tribology Conference Tokyo, May 2011 

     More details

    Event date: 2011.05.23 - 2011.05.25   Language:Japanese  

  • Rebound Hardness Testing by Using Hammer with Sharp Indenter -Effect of Inclination of Hammer on Restitution Coefficient-

    Proceedings of JAST Tribology Conference Tokyo, May 2011 

     More details

    Event date: 2011.05.23 - 2011.05.25   Language:Japanese  

  • Electrical Pitting Resistance of Gel-Lubricants and Ionic Liquids

    Proceedings of JAST Tribology Conference Tokyo, May 2011 

     More details

    Event date: 2011.05.23 - 2011.05.25   Language:Japanese  

  • Influence of Pressure-Viscosity Coefficient of Oils on Electrical Pitting

    Proceedings of JAST Tribology Conference Tokyo, May 2011 

     More details

    Event date: 2011.05.23 - 2011.05.25   Language:Japanese  

  • Rebound Hardness Testing by Using Hammer with Sharp Indenter

    Proceedings of JAST Tribology Conference Fukui, September 2010 

     More details

    Event date: 2010.09.14 - 2010.09.17   Language:Japanese  

  • Covering and Lubrication Properties of MoS2 Solid Lubricant to Bearing Roller by Planetary Milling

    Proceedings of JAST Tribology Conference Fukui, September 2010 

     More details

    Event date: 2010.09.14 - 2010.09.17   Language:Japanese  

  • Pursuit of Real Contact Area up to the Complete Contact -Study on Two-Dimensional Regular Wavy Surface under Atmosphere and Decompression Environments-

    Proceedings of JAST Tribology Conference Tokyo, May 2010 

     More details

    Event date: 2010.05.17 - 2010.05.19   Language:Japanese  

  • 電食発生に及ぼすグリース種類の影響

    安川電機㈱

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2009.05.18 - 2009.05.20   Language:Japanese  

  • グリース潤滑下における繰返し衝突面の観察

    工学府機械知能工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2009.05.18 - 2009.05.20   Language:Japanese  

  • 一次元規則性粗さの全面接触解析(第2報 接触下における表面形状の測定)

    工学府機械知能工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2008.09.16 - 2008.09.19   Language:Japanese  

  • 膜形成後に真空チャンバ内へ乾燥ガスを導入して作製した二硫化モリブデンスパッタ膜の大気中での潤滑特性(3)-潤滑特性向上メカニズムの検討-

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2008.09.16 - 2008.09.19   Language:Japanese  

  • 一次元規則性粗さの全面接触解析(第一報 有限要素法による弾性解析)

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2008.09.16 - 2008.09.19   Language:Japanese  

  • 膜形成後に真空チャンバ内へ乾燥ガスを導入して作製した二硫化モリブデンスパッタ膜の大気中での潤滑特性(4)-アルゴン分圧の影響-

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2008.09.16 - 2008.09.19   Language:Japanese  

  • 膜形成後に真空チャンバ内へ乾燥ガスを導入して作製した二硫化モリブデンスパッタ膜の大気中での潤滑特性(1)-測定環境下での保持時間の影響-

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • SUS440C製ローラ上に形成した二硫化モリブデンスパッタ膜の大気中におけるすべり摩耗機構

    企業人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • 二硫化モリブデンスパッタ膜の摩擦係数に及ぼす湿度の影響に関する一考察

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • SUS440C基板上に形成した銀スパッタ膜の潤滑特性に及ぼすスパッタエッチングの影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • 膜形成後に真空チャンバ内へ乾燥ガスを導入して作製した二硫化モリブデンスパッタ膜の大気中での潤滑特性(2)-湿度と大気中保管の影響-

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • SUS440C製ローラ上に形成した二硫化モリブデンスパッタ膜の摩擦寿命に及ぼす大気中保管の影響

    企業人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.09.26 - 2007.09.28   Language:Japanese  

  • Vickers Indentation of Electroplated Coatings

    3nd International Indentation Workshop 

     More details

    Event date: 2007.07.15 - 2007.07.20   Language:English  

  • 反発硬さに及ぼす圧子形状の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.05.28 - 2007.05.30   Language:Japanese  

  • 二ハード系鋳鉄の工業用水中の摩耗に及ぼすクロム含有量の影響

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.05.28 - 2007.05.30   Language:Japanese  

  • 油潤滑下における繰返し衝突面の観察(第3報,衝突面材質の影響)

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2007.05.28 - 2007.05.30   Language:Japanese  

  • Effects of Storage Period in Air on Wear Life of MoS2 Films Sputtered onto Stainless Steel

    Proceedings of The Third Asia International Conference on Tribology 

     More details

    Event date: 2006.10.16 - 2006.10.19   Language:English  

  • Effects of Storage Period in Air on Wear Life of MoS2 Films Sputtered onto Stainless Steel

    3rd Asia International Conference on Tribology, Kanazawa 

     More details

    Event date: 2006.10.16 - 2006.10.19   Language:English  

  • メカニカルシール超鋼合金リングのしゅう動特性に及ぼすポアおよびカーボン分散の影響

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • MoS2スパッタ膜の昇温脱離特性に及ぼす膜密度の影響

    安川電機

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • MoS2スパッタ膜のEPMA組成分析値に及ぼす試料の履歴の影響

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • SUS440C上に形成したMoS2スパッタ膜の密着力に及ぼす大気湿度環境下での保管時間の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • 油潤滑下における繰返し衝突面の観察(第2報、衝突速度の影響)

    機械知能工学専攻

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • MoS2スパッタ膜被覆ローラの摩擦寿命に及ぼす測定環境下での保持時間の影響

    安川電機

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2006.05.15 - 2006.05.17   Language:Japanese  

  • 二硫化モリブデン固体潤滑膜被覆ローラの摩擦寿命に及ぼす空気中保管の影響

    生命体工学研究科

    西日本腐蝕防蝕研究会,表面技術協会九州支部,腐食防食協会九州支部 第152回例会会報 

     More details

    Event date: 2005.12   Language:Japanese  

  • 二硫化モリブデン固体潤滑膜被覆ローラの摩擦寿命到達メカニズムに関する一考察

    安川電機

    西日本腐蝕防蝕研究会,表面技術協会九州支部,腐食防食協会九州支部 第152回例会会報 

     More details

    Event date: 2005.12   Language:Japanese  

  • MoS2スパッタ膜の摩擦係数に及ぼす湿度の影響に関する一考察

    機械知能工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • 昇温脱離法によるMoS2固体潤滑膜被覆ローラのガス放出特性

    安川電機

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • EHL下の摩耗に及ぼすスーツ混入の影響

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • 反発硬さに及ぼすハンマ落下高さの影響

    機械知能工学専攻

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • 高密度/低密度の2層膜構造を有するMoS2スパッタ膜被覆ローラの大気中での潤滑特性

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • 油潤滑下における繰返し衝突面の観察

    機械知能工学専攻

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2005.11.16 - 2005.11.18   Language:Japanese  

  • Effects of soot on wear in EHL contacts

    The 32nd Leeds-Lyon Symposium on Tribology 

     More details

    Event date: 2005.09.06 - 2005.09.09   Language:English  

  • Evaluation of Adhesion Strength of Electroplated Films by Rebound Hardness Testing

    International Tribology Conference, 2005 Kobe 

     More details

    Event date: 2005.05.29 - 2005.06.02   Language:English  

  • Ar-0.4%O2雰囲気中で作製したMo-S-Oスパッタ膜被覆ローラの潤滑特性-MoS2スパッタ膜との比較-

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.11.10 - 2004.11.12   Language:Japanese  

  • 反発係数を用いた表面硬化層の評価

    鉄道総合技術研究所

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.11.10 - 2004.11.12   Language:Japanese  

  • 固体潤滑被膜覆ローラの潤滑特性測定装置の開発

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.11.10 - 2004.11.12   Language:Japanese  

  • MOS2スパッタ膜被覆ローラの寿命の及ぼす膜厚の影響

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.11.10 - 2004.11.12   Language:Japanese  

  • MoS2-XOXスパッタ膜被膜ローラの潤滑特性に及ぼす酸素含有量の影響

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.05.10 - 2004.05.12   Language:Japanese  

  • 反発硬さ試験における相似則成立条件

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.05.10 - 2004.05.12   Language:Japanese  

  • 反応性スパッタ法で作成したMoS2-XOX膜の性状

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.05.10 - 2004.05.12   Language:Japanese  

  • MoS2粉末成形体ならびにMoS2スパッタ膜とSUS440C間で生じる接触腐食の違い

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.05.10 - 2004.05.12   Language:Japanese  

  • 無潤滑下における繰返し衝突面の観察

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2004.05.10 - 2004.05.12   Language:Japanese  

  • 真空環境下におけるIn被膜材のしゅう動特性に及ぼす酸化の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • 種々密度を有するMoS2スパッタ膜被覆ローラの潤滑特性-空気中保管による潤滑特性の変化-

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • 種々密度を有するMoS2スパッタ膜被覆ローラの潤滑特性-空気中保管による潤滑特性変化のメカニズム-

    生命体工学研究科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • ショア硬さ試験におけるハンマ振動と材料の機械的特性との関係

    機械知能工学科

    日本トライボロジー学会トライボロジー会議予稿集 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • 反発硬さの解析とその応用

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • 種々密度を有するMoS2スパッタ膜被覆ローラの潤滑特性-膜厚の影響-

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.11.11 - 2003.11.13   Language:Japanese  

  • 反発硬さ試験による表面被覆材のはく離評価

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.05.12 - 2003.05.14   Language:Japanese  

  • ビッカース圧痕を利用した転がり接触面の機械的特性の変化の把握と摩耗量推定法の検討

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2003.05.12 - 2003.05.14   Language:Japanese  

  • 硬さセンサを用いたう蝕(虫歯)の検出

    高知工科大学

    日本非破壊検査協会平成15年度春季大会講演概要集 

     More details

    Event date: 2003.05   Language:Japanese  

  • レーザスペックル法を利用した歯の表面粗さ計測に関する考察

    福岡県工業技術センター

    日本実験力学会講演論文集(2003年度年次講演会) 

     More details

    Event date: 2003.04   Language:Japanese  

  • 超鋼合金しゅう動面のき裂発生に及ぼす残留応力の影響

    本人

    日本機械学会第1回機素潤滑設計部門講演会講演論文集(日本機械学会) 

     More details

    Event date: 2003.03   Language:Japanese  

  • ローラ上に形成した種々密度を有する二硫化モリブデンスパッタ膜の潤滑寿命

    生命体工学研究科,村岡善之

    日本機械学会九州支部第56期総会講演会講演論文集(日本機械学会) 

     More details

    Event date: 2003.03   Language:Japanese  

  • 異なるアルゴン分圧で形成した二硫化モリブデンスパッタ膜の密度と組成

    生命体工学研究科,村岡善之

    日本機械学会九州支部第56期総会講演会講演論文集(日本機械学会) 

     More details

    Event date: 2003.03   Language:Japanese  

  • 転動体表面に被膜した固体潤滑膜の寿命評価装置の開発

    機械知能工学科,砂原賢治

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2002.10   Language:Japanese  

  • 生体硬さの評価とその応用

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2002.10   Language:Japanese  

  • DLC膜表面物性のトライボ特性に及ぼす影響

    有限会社フルークス,桑山健太

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2002.10   Language:Japanese  

  • 硬度測定用圧子と試験片表面間の摩擦測定

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2002.05   Language:Japanese  

  • 放電加工面の機械的特性

    大分県産業科学技術センター,城門由人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2001.11   Language:Japanese  

  • ビッカース圧痕形状に及ぼす材料特性および摩擦の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2001.11   Language:Japanese  

  • Prediction of Stress-Strain Curves of Elastic-Plastic Materials based on the Vickers Indentation

    2nd International Indentation Workshop 

     More details

    Event date: 2001.07.15 - 2001.07.20   Language:English  

  • 繰返し衝撃下における表面損傷

    機械知能工学専攻

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2001.05   Language:Japanese  

  • 超鋼合金しゅう動面の微細き裂発生機構(第2報 材質の影響)

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2001.05   Language:Japanese  

  • Shallow Cracks on Rubbing Surface of Cemented Carbide

    Powder Metallurgy World Congress 

     More details

    Event date: 2000.11.12 - 2000.11.16   Language:English  

  • Dimple Phenomena Study by Dichromatic Colorimetric Interferometry

    International Tribology Conference 

     More details

    Event date: 2000.10.29 - 2000.11.02   Language:English  

  • ニッケルめっき材の反発硬さに及ぼすはく離の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 2000.05   Language:Japanese  

  • 超硬合金摺動面の微細亀裂

    日本タングステン

    春期講演大会概要集(日本金属学会) 

     More details

    Event date: 2000.03.29 - 2000.03.31   Language:Japanese  

  • 超硬合金しゅう動面の微細き裂発生機構

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 1999.10.27 - 1999.10.29   Language:Japanese  

  • レールダークスポット損傷に及ぼす金属組織と硬さの影響

    機械知能工学科

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 1999.10.27 - 1999.10.29   Language:Japanese  

  • 反発硬さに及ぼすハンマ重心の影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 1999.10.27 - 1999.10.29   Language:Japanese  

  • 転動接触疲労損傷に及ぼす環境の影響

    機械知能工学科

    九州支部中国四国支部合同企画長崎地方講演会講演論文集(日本機械学会) 

     More details

    Event date: 1999.10.16 - 1999.10.17   Language:Japanese  

  • めっき材のビッカース圧こん形状に及ぼす下地・めっき厚さの影響

    本人

    トライボロジー会議予稿集(日本トライボロジ-学会) 

     More details

    Event date: 1999.05.10 - 1999.05.12   Language:Japanese  

▼display all

Lectures

  • Pursuit of Real Contact Area of Regular Wavy Surface up to the Complete Contact

    28th Annual Meeting of MRS-Japan 2018  2018.12  The material research of Japan

     More details

    Presentation type:Invited lecture  

  • 規則性凹凸面の真実接触面積と摩擦特性に及ぼす凹凸形状と厚さの影響

    第118回トライボロジー研究分科会  2019.07  一般社団法人日本ゴム協会 

     More details

    Language:Japanese   Presentation type:Invited lecture   Venue:東京  

  • 規則性凹凸面の真実接触面積と摩擦特性

    第61期第3回固体潤滑研究会  2016.12  日本トライボロジー学会固体潤滑研究会

     More details

    Presentation type:Invited lecture   Venue:宇部,山口  

  • 球体および尖端圧子ハンマによる潤滑面の反発係数の測定

    北九州大会(第43回石油・石油化学討論会)  2013.11  石油学会

     More details

    Event date: 2013.11.14 - 2013.11.15   Language:Japanese   Presentation type:Special lecture   Venue:北九州  

  • 全面接触に至るまでの真実接触面積の追跡 -ゴムを用いた大気圧および減圧下における二次元規則性凹凸面の検討-

    平成25年度第1回高分子材料のトライボロジー研究会  2013.07  日本トライボロジー学会

     More details

    Presentation type:Invited lecture   Venue:東京  

  • 反発硬さ試験の新しい展開

    「中国四国機素潤滑設計技術研究会」第58 回,「中国四国支部MD&T 研究会」第56 回,「中国四国地区における先端機械要素・トライボロジー技術に関する研究調査分科会」第4 回例会  2013.06  財団法人北九州産業学術推進機構

     More details

    Presentation type:Invited lecture   Venue:宇部,山口  

  • Pursuit of Real Contact Area up to the Complete Contact - Study on Two-Dimensional Regular Wavy Surface of Rubber under Atmosphere and Decompression Environments -

    Proceedings of JAST Tribology Conference Tokyo, May 2013  2013.05 

     More details

    Event date: 2013.05.20 - 2013.05.22   Language:Japanese   Presentation type:Special lecture  

  • Asperity Contact and its Interaction

    Proceedings of JAST Tribology Conference Tokyo, May 2012  2012.05 

     More details

    Event date: 2012.05.14 - 2012.05.16   Language:Japanese   Presentation type:Special lecture  

  • お口の万歩計「そしゃく回数検出装置」

    H22年度 技術移転に係わる目利き人材育成プログラム  2011.01  独立行政法人 科学技術振興機構

     More details

    Presentation type:Invited lecture   Venue:北九州  

  • お口の万歩計「咀嚼回数検出装置」

    第94回産学交流サロン「ひびきのサロン」  2010.07  財団法人北九州産業学術推進機構

     More details

    Presentation type:Invited lecture   Venue:北九州  

  • Friction and Wear Characteristics in Air of Molybdenum Disulfide Sputtered Films Introduced Dry Air to Vacuum Chamber after Sputtering

    Proceedings of World Tribology Congress 2009, Kyoto Japan  2009.09 

     More details

    Event date: 2009.09.06 - 2009.09.11   Language:English   Presentation type:Keynote lecture  

▼display all

Press

  • Advances in Engineering   Internet

    Masaharu Ueda,Kenji Matsuda

    Advances in Engineering  2020.11.03

  • TLO 成功モデルの分析

    松田健次

    日刊工業新聞  2003.06.16

     More details

    そしゃく回数検出,北九州TLO,技術移転

  • 咀嚼回数検出装置

    松田健次,兼田楨宏

    中小企業総合事業団 情報・技術部 「共同研究等動向調査報告書」  2003.05

     More details

    咀嚼回数検出装置,TLO,特許

  • 正しい”そしゃく”促進

    松田健次

    日刊工業新聞  2002.02.13

     More details

    そしゃく回数検出装置,TLO,特許

Honors and Awards

  • 日本トライボロジー学会論文賞

    日本トライボロジー学会   2013.05.21

    松田健次,奥田洋三,中村研八

     More details

    Country:Japan

  • 日本トライボロジー学会論文賞

    日本トライボロジー学会   2014.05.20

    砂原賢治,石田雄二,山下慎次,山本正治,大野信義,西川宏志,松田健次,兼田 楨宏

     More details

    Country:Japan

Grants-in-Aid for Scientific Research

  • 反発硬さ試験法の新しい展開

    Grant number:25630039  2013.04 - 2015.03   挑戦的萌芽研究

  • 固体潤滑膜の大気中でのすべり摩耗機構に関する研究

    Grant number:19360076  2007.04 - 2009.03   基盤研究(B)

  • 接触腐食防止と結合層強化による真空大気両環境対応固体潤滑膜の研究

    Grant number:16360081  2004.04 - 2006.03   基盤研究(B)

  • 反発硬度試験を利用した皮膜の付着強度評価に関する研究

    Grant number:10750108  1998.04 - 2000.03   奨励研究(A)

  • 表面被覆材の機械的性質とトライボロジー特性との関係に関する研究

    Grant number:06750150  1994.04 - 1995.03   奨励研究(A)

  • ビッカース硬度試験を利用した皮膜材の機械的性質評価に関する研究

    Grant number:05750147  1993.04 - 1994.03   奨励研究(A)

▼display all

Charge of off-campus class subject

  • Institution:北九州大学

Activities of Academic societies and Committees

  • Japanese Society of Tribologist  

    2020.05 - 2021.05

  • The Japan Society of Mechanical Engineers  

    2014.04 - 2015.03

  • The Japan Society of Mechanical Engineers  

    2013.04 - 2014.03

  • Japanese Society of Tribologist  

    2012.05 - 2013.05

  • 日本トライボロジー学会   ITC Fukuoka 2023実行委員会委員  

    2022.05 - 2023.05

  • Japanese Society of Tribologist  

    2019.05 - 2020.05

  • Japanese Society of Tribologist  

    2019.05 - 2020.05

  • Japanese Society of Tribologist  

    2019.05 - 2020.05

  • The Japan Society of Mechanical Engineers  

    2016.04 - 2017.03

  • The Japan Society of Mechanical Engineers  

    2016.04 - 2017.03

  • Japanese Society of Tribologist  

    2012.05 - 2021.05

▼display all

Social activity outside the university

  • コロナ禍における本学工学部での遠隔授業の取組みとJABEE の一斉受審を振り返って

    Role(s):Lecturer

    日本技術者教育認定機構ー日本工学教育協会共催  「国際的に通用する技術者教育ワークショップシリーズ 第16回」“遠隔授業を活用した科目に対する質保証システム”プログラム”  オンライン  2022.03.26

     More details

    Audience: Teachers

    Type:Seminar, workshop

  • 北九州地域産業人材育成フォーラム(社会人プログラム)テクニカルカレッジ inアイム電機工業(株)

    Role(s):Lecturer

    2015.03.17

     More details

    Audience: General

    Type:Seminar, workshop