Papers - NARAHARA Hiroyuki
-
A Study On Fluid Deposition Resolution In Inkjet Printing Of Multi Material Fluid For Rapid Prototyping Application Reviewed
M. b. Ibrahim,T. Otsubo,H. Narahara,H. Koresawa,H. Suzuki
Proceedings Of The International Conference On Recent Advances In Mechanical & Materials Engineering, 1105 - 1109 2005.05
-
Measurement of Liquid Surface Unevenness in Stereolithography Reviewed
H. Narahara,A. Yoshikawa ,H. Suzuki
JSME International Journal, Series C 47 ( 1 ) 129 - 135 2004.04
-
A Method for Liquid Surface Unevenness Measurement in Stereolithography Reviewed
H. Narahara,A. Yoshikawa and H. Suzuki
Proc. of 2nd International Conference International Conference on Leading Edge Manufacturing in 21th Century 2003.11
-
光造形法における樹脂液面上凹凸測定の研究 Reviewed
吉川晶洋,楢原弘之,鈴木裕
精密工学会誌 69 ( 10 ) 1434 - 1438 2003.10
-
新しい型・模型技術への挑戦 Reviewed
斎藤勝政,近藤幹夫,青山英樹,楢原弘之
精密工学会誌 69 ( 8 ) 1051 - 1056 2003.08
-
新しい型・模型技術への挑戦
斎藤勝政，近藤幹夫，青山英樹，楢原弘之
精密工学会誌 ( 精密工学会誌 ) 69 ( 8 ) 1051 - 1056 2003.08
-
Development of Liquid Surface Unevenness Measuring Method Based on Mirror Reflection Image of Lattice Stripe in Stereolithography Reviewed
H. Narahara,A. Yoshikawa and H. Suzuki
The 24th Japan Rapid Prototyping Symposium 87 - 90 2003.06
-
Cu-Be合金の入れ子を用いた射出成形金型における異なる冷却条件による成形性の検証
鬼木彰,高峰,是澤宏之,楢原弘之,鈴木裕
型技術 17 ( 13 ) 74 - 75 2002.12
-
アメリカ合衆国における品質工学のニーズ
D. Clausing,(訳)楢原弘之
品質工学 10 ( 6 ) 54 - 64 2002.12
-
異形多数個取りにおける充填効率向上のための研究－充填の均一化－
吉田崇志,是澤宏之,楢原弘之,鈴木裕,川下英二,木下篤,金城盛順
型技術 17 ( 13 ) 80 - 81 2002.12
-
Investigation of Cooling Effects in Corner Areas of Mold Cores Applied with Copper Alloy Inserts and Cooling Channels Reviewed
F. Gao,A. Oniki,H. Koresawa,H. Narahara ,H. Suzuki
Proc. of the 6th International Conference on Mechatronics Technology 272 - 276 2002.10
-
Research on Improvement in Parts Accuracy of Stereolithography Using Quality Engineering Reviewed
H. Narahara,T. Aono ,H. Suzuki
Proc. of the 6th International Conference on Mechatronics Technology 352 - 357 2002.10
-
Study on Design for Manufacture of Rapid Prototyping System Based on Knowledge Database Reviewed
Hiroyuki Narahara,Shinnichiro Kawaguchi,Hiroshi Suzuki
Proc. of the 6th International Conference on Mechatronics Technology 346 - 351 2002.10
-
熱集中部にCu-Be合金を用いた射出成形金型の成形性に関する検証実験
鬼木彰,高峰,是澤宏之,楢原弘之,鈴木裕
型技術 17 ( 8 ) 44 - 45 2002.07
-
SLS粉末劣化による造形不良の推定と防止に関する研究
福丸浩史,楢原弘之,鈴木裕
型技術 17 ( 8 ) 30 - 31 2002.07
-
プラスチック射出成形金型におけるCu-Be合金インサート材形状の自動生成 Reviewed
高峰,是澤宏之,楢原弘之,鈴木裕
精密工学会誌 68 ( 6 ) 777 - 782 2002.06
-
Study on the Development of Surface Fidelity Solid-image Fabrication Process for Hi-Fi Rapid Prototyping System Reviewed
Hiroyuki Narahara,Yoshikatsu Shiwa,Hiroshi Suzuki
Proc. of 5th Franco-Japanese Congress & 3rd European-Asian Congress of Mecatronics 525 - 530 2001.10
-
3次元ソリッドCAD/CAMシステムに基づく金型製作の効率化に関するアンケート調査
楢原弘之,鈴木裕,是澤宏之
型技術 16 ( 8 ) 132 - 133 2001.07
-
金型分割面先端の間隙を低減する金型分割面の自動生成
内田暁和,是澤宏之,楢原弘之,鈴木裕
型技術 16 ( 8 ) 76 - 77 2001.07
-
射出成形金型における直管の組合せによる冷却回路の自動配置
徳能竜一,是澤宏之,楢原弘之,鈴木裕
型技術 134 ( 135 ) 76 - 77 2001.07