Papers - KORESAWA Hiroshi
-
Evaluation on mechanical characteristic of filament wire fabricated under high shear rate Reviewed International journal
是澤宏之,日高明,吉次雄太,石井将規,楢原弘之
Proceedings of ICPE2024: The 20th International Conference on Precision Engineering ( 精密工学会 ) GS07-11 2024.10
-
Correlation of mechanical properties between 3D printer prototypes and injection molded parts for snap-fit functional design Reviewed
Y. KUNIMATSU, H. NARAHARA, H. KORESAWA, H.TAGUCHI
Proceedings of The International Conference on Leading Edge Manufacturing/Materials&Processing LEM&P 2023 209 - 213 2023.06
-
Tool condition monitoring method by anomaly segmentation of time-frequency images using acoustic emission in small hole drilling Reviewed International journal
T.NAKANO, H. KORESAWA, H. NARAHARA
Journal of Advanced Mechanical Design, Systems, and Manufacturing ( 日本機械学会 ) 17 ( 3 ) 2023.06
-
Feasibility study of the effect of support structures on part accuracy in additive manufacturing Reviewed
H.NARAHARA, S.MITSUI, Y.KUNIMATSU, H.TAGUCHI, H.KORESAWA
The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering ) C128 2022.11
-
Investigation of Mechanical Property Values of 30 Printer Prototype Parts in Snap-Fits Reviewed
Y.KUNIMATSU, H.NARAHARA, H.KORESAWA, H.TAGUCHI
The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering ) C123 2022.11
-
Study on the fracture phenomenon at the time of separation of the support material in the powder bed fusion method Reviewed
K.MATSUDA, H.NARAHARA, H.KORESAWA, K.NAKAMURA
The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering ) C299 2022.11
-
Intelligent Diagnosis for Micro Hole Drilling State by Acoustic Emission Signal Analysis Reviewed
T.NAKANO, H.KORESAWA, H.NARAHARA
The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century(LEM21) 589 - 593 2021.11
-
Study on support size dependency for support removal of metal additive manufacturing Reviewed
K.MATSUDA, H.NARAHARA, H.KORESAWA
The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century(LEM21) 425 - 426 2021.11
-
Improvement in the Permeability Characteristics of Injection Mold Fabricated by Additive Manufacturing and Irradiated by Electron Beams Reviewed
International Journal of Automation Technology 11 ( 1 ) 97 - 103 2017.01
-
Low-Energy Injection Molding Process by a Mold with Permeability Fabricated by Additive Manufacturing Reviewed
International Journal of Automation Technology 10 ( 1 ) 101 - 105 2016.01
-
Behavior Analysis of Delta 3D Printer Using a Multi-domain Physics Simulator Reviewed
Yutaka Baba, Hiroyuki Narahara, Hiroshi Koresawa
B22 2015.10
-
金属光造形複合加工法による通気特性を有する射出成形金型に関する研究 Reviewed
是澤宏之, 河野匠司, 楢原弘之, 鈴木裕
精密工学会誌 80 ( 11 ) 1018 - 1022 2014.11
-
Automatic Design of Cooling Channels for Block Laminated Molds: A Resolution Study Reviewed
J.Liang,H.Narahara,H.Koresawa,H.Suzuki
Int. J. of Engineering and Advanced Technology 2 ( 6 ) 52 - 60 2013.08
-
Permialibity Performance on Porous Structure of Injection Mold Fabricated by Metal Laser Sintering Combined with High Speed Milling Reviewed
H.Narahara, S.Takeshita, H.Fukumaru, H.Koresawa, H.Suzuki
Int. J. of Automation Technology 6 ( 5 ) 576 - 583 2012.09
-
Design Method for Inner Structure of Injection Mold Fabricated by Metal Laser Sintering Reviewed
H.Koresawa, H.Fukumaru, M.Kojima, J.Iwanaga, H.Narahara, H.Suzuki
Int. J. of Automation Technology 6 ( 5 ) 584 - 590 2012.09
-
2段すくい角を有するエンドミル工具の開発
伊藤悠太, 是澤宏之, 楢原弘之, 鈴木裕
型技術 26 ( 7 ) 52 - 53 2011.07
-
数値解析を用いた多数個取りダイカスト金型の研究
古谷紀宗, 是澤宏之, 福丸浩史, 楢原弘之, 鈴木裕
型技術 25 ( 12 ) 86 - 87 2010.12
-
数値解析を用いた射出成形金型の構造に関する基礎的研究
是澤宏之,塚辺直貴,福丸浩史,楢原弘之,鈴木裕
型技術 25 ( 7 ) 50 - 51 2010.07
-
数値解析を用いた多数個取ダイカスト金型の研究
古谷紀宗,是澤宏之,福丸浩史,楢原弘之,鈴木裕
型技術 25 ( 12 ) 86 - 87 2010.04
-
Optimization Design of Cooling Channel of Block Laminated Mold by using Genetic Algorithm Reviewed
J.Liang,H.Narahara,H.Koresawa,H.Suzuki
Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 207 - 212 2009.12