Papers - KORESAWA Hiroshi

Evaluation on mechanical characteristic of filament wire fabricated under high shear rate Reviewed International journal

是澤宏之,日高明,吉次雄太,石井将規,楢原弘之

Proceedings of ICPE2024: The 20th International Conference on Precision Engineering ( 精密工学会 )   GS07-11   2024.10

　More details

Authorship：Lead author,　Last author,　Corresponding author   Language：English   Publishing type：Research paper (international conference proceedings)

日本   仙台   2024.10.23  -  2024.10.27

Correlation of mechanical properties between 3D printer prototypes and injection molded parts for snap-fit functional design Reviewed

Y. KUNIMATSU, H. NARAHARA, H. KORESAWA, H.TAGUCHI

Proceedings of The International Conference on Leading Edge Manufacturing/Materials&Processing LEM&P 2023   209 - 213   2023.06

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (international conference proceedings)

アメリカ   NJ   2023.06.13  -  2023.06.16

Tool condition monitoring method by anomaly segmentation of time-frequency images using acoustic emission in small hole drilling Reviewed International journal

T.NAKANO, H. KORESAWA, H. NARAHARA

Journal of Advanced Mechanical Design, Systems, and Manufacturing ( 日本機械学会 )   17 ( 3 )   2023.06

　More details

Authorship：Corresponding author   Language：English   Publishing type：Research paper (scientific journal)

DOI： 10.1299/jamdsm.2023jamdsm0034

Feasibility study of the effect of support structures on part accuracy in additive manufacturing Reviewed

H.NARAHARA, S.MITSUI, Y.KUNIMATSU, H.TAGUCHI, H.KORESAWA

The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering )   C128   2022.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

日本   奈良   2022.11.28  -  2022.12.02

Investigation of Mechanical Property Values of 30 Printer Prototype Parts in Snap-Fits Reviewed

Y.KUNIMATSU, H.NARAHARA, H.KORESAWA, H.TAGUCHI

The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering )   C123   2022.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

日本   奈良   2022.11.28  -  2022.12.02

Study on the fracture phenomenon at the time of separation of the support material in the powder bed fusion method Reviewed

K.MATSUDA, H.NARAHARA, H.KORESAWA, K.NAKAMURA

The 19th International Conference on Precision Engineering ( The Japan Society for Precision Engineering )   C299   2022.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

日本   奈良   2022.11.28  -  2022.12.02

Intelligent Diagnosis for Micro Hole Drilling State by Acoustic Emission Signal Analysis Reviewed

T.NAKANO, H.KORESAWA, H.NARAHARA

The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century(LEM21)   589 - 593   2021.11

　More details

Authorship：Last author,　Corresponding author   Language：English   Publishing type：Research paper (international conference proceedings)

Study on support size dependency for support removal of metal additive manufacturing Reviewed

K.MATSUDA, H.NARAHARA, H.KORESAWA

The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century(LEM21)   425 - 426   2021.11

　More details

Authorship：Last author,　Corresponding author   Language：English   Publishing type：Research paper (international conference proceedings)

Improvement in the Permeability Characteristics of Injection Mold Fabricated by Additive Manufacturing and Irradiated by Electron Beams Reviewed

International Journal of Automation Technology   11 ( 1 )   97 - 103   2017.01

　More details

Language：English   Publishing type：Research paper (scientific journal)

DOI： 10.20965/ijat.2017.p0097

Scopus

Low-Energy Injection Molding Process by a Mold with Permeability Fabricated by Additive Manufacturing Reviewed

International Journal of Automation Technology   10 ( 1 )   101 - 105   2016.01

　More details

Language：English   Publishing type：Research paper (scientific journal)

DOI： 10.20965/ijat.2016.p0101

Scopus

Behavior Analysis of Delta 3D Printer Using a Multi-domain Physics Simulator Reviewed

Yutaka Baba, Hiroyuki Narahara, Hiroshi Koresawa

B22   2015.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

日本   京都   2015.10.18  -  2015.10.22

金属光造形複合加工法による通気特性を有する射出成形金型に関する研究 Reviewed

是澤宏之, 河野匠司, 楢原弘之, 鈴木裕

精密工学会誌   80 ( 11 )   1018 - 1022   2014.11

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Automatic Design of Cooling Channels for Block Laminated Molds: A Resolution Study Reviewed

J.Liang,H.Narahara,H.Koresawa,H.Suzuki

Int. J. of Engineering and Advanced Technology   2 ( 6 )   52 - 60   2013.08

　More details

Language：English   Publishing type：Research paper (scientific journal)

Permialibity Performance on Porous Structure of Injection Mold Fabricated by Metal Laser Sintering Combined with High Speed Milling Reviewed

H.Narahara, S.Takeshita, H.Fukumaru, H.Koresawa, H.Suzuki

Int. J. of Automation Technology   6 ( 5 )   576 - 583   2012.09

　More details

Language：English   Publishing type：Research paper (scientific journal)

Design Method for Inner Structure of Injection Mold Fabricated by Metal Laser Sintering Reviewed

H.Koresawa, H.Fukumaru, M.Kojima, J.Iwanaga, H.Narahara, H.Suzuki

Int. J. of Automation Technology   6 ( 5 )   584 - 590   2012.09

　More details

Language：English   Publishing type：Research paper (scientific journal)

DOI： 10.20965/ijat.2012.p0584

Scopus

2段すくい角を有するエンドミル工具の開発

伊藤悠太, 是澤宏之, 楢原弘之, 鈴木裕

型技術   26 ( 7 )   52 - 53   2011.07

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

数値解析を用いた多数個取りダイカスト金型の研究

古谷紀宗, 是澤宏之, 福丸浩史, 楢原弘之, 鈴木裕

型技術   25 ( 12 )   86 - 87   2010.12

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

宇都宮   2010.11.17  -  2010.11.18

数値解析を用いた射出成形金型の構造に関する基礎的研究

是澤宏之,塚辺直貴,福丸浩史,楢原弘之,鈴木裕

型技術   25 ( 7 )   50 - 51   2010.07

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

数値解析を用いた多数個取ダイカスト金型の研究

古谷紀宗,是澤宏之,福丸浩史,楢原弘之,鈴木裕

型技術   25 ( 12 )   86 - 87   2010.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Optimization Design of Cooling Channel of Block Laminated Mold by using Genetic Algorithm Reviewed

J.Liang,H.Narahara,H.Koresawa,H.Suzuki

Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)   207 - 212   2009.12

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Osaka   2009.12.02  -  2009.12.04

Design Method for Structure of Injection Mold Fabricated by Metal Laser Sintering Reviewed

H.Koresawa,M.Kojima,H.Narahara,H.Fukumaru,H.Suzuki

Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)   597 - 601   2009.12

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Osaka   2009.12.02  -  2009.12.04

Applications of Non-Rotational Cutting Method with Ultrasonic Vibration to Finish Process for Steel Reviewed

Masafumi Yoshimaru,Gao Feng,Hiroshi Koresawa,Hiroyuki Narahara,Hiroshi Suzuki

3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2009)   1P1-4   2009.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Kitakyushu   2009.11.11  -  2009.11.13

3D Cooling Channel Automatic Generation of Block Laminated Mold by Using Gnetic Algorithm Reviewed

Jianguo Liang,Hiroyuki Narahara,Hiroshi Koresawa,Hiroshi Suzuki

3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2009)   1A1-6   2009.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Kitakyushu   2009.11.11  -  2009.11.13

金属光造形による通気性金型の性能向上に関する研究

楢原弘之,椋野雅人,藤原伸幸,津田利尚,福丸浩史,是澤宏之,鈴木裕

型技術   24 ( 8 )   48 - 49   2009.07

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Processing Micro Reactor by Non-Rotational Cutting Tool with Ultrasonic Vibration Reviewed

Masafumi Yoshimaru,Hiroshi Koresawa,Hiroyuki Narahara,Hiroshi Suzuki

Int. J. of Automation Technology   3 ( 5 )   602 - 609   2009.04

　More details

Language：English   Publishing type：Research paper (scientific journal)

Fundamental Research on Fused Deposition Modeling using Conductive Material by Carbon Nanotube Mixing Resin Reviewed

H. Narahara,Y. Okamura,H. Fukumaru,H. Koresawa,H. Suzuki

7th France-Japan Congress on Mechatronics2008   ( 186 )   1 - 5   2008.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

France   Le grand Bornand   2008.05.21  -  2008.05.23

Permeability Characteristics and Applications of Plastic Injection Molding Fabricated by Metal Laser Sintering Combined with High Speed Milling Reviewed

M. Kojima,H. Narahara,Y. Nakao,H. Fukumaru,H. Koresawa,H. Suzuki,S. Abe

Int. J. of Automation Technology   2 ( 3 )   175 - 181   2008.04

　More details

Language：English   Publishing type：Research paper (scientific journal)

DOI： 10.20965/ijat.2008.p0175

Cooling Structure Optimization Design of Block Laminated Mold by Using Genetic Algorithm Reviewed

J. Liang,F. Gao,H. Koresawa,H. Narahara,H. Suzuki

Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)   399 - 404   2007.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Fukuoka   2007.11.07  -  2007.11.09

射出成形金型の構造解析に関する研究

是澤宏之,清水康弘,小島道雄,楢原弘之,鈴木裕

型技術   22 ( 8 )   82 - 83   2007.07

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Injection mould with permeability utilised Metal Laser Sintering Combined with High Speed Milling Reviewed

M. Kojima,H. Narahara,H. Suzuki,H. Koresawa,S. Abe

Int. J. Precision Technology   1 ( 1 )   55 - 64   2007.04

　More details

Language：English   Publishing type：Research paper (scientific journal)

ISO230－4を基礎とした5軸NC工作機械の動作経路計測 Reviewed

牛尾雅樹,蔵前法文,神谷昌秀,楢原弘之,是澤宏之,鈴木裕

精密工学会誌   72 ( 7 )   873 - 876   2007.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Inkjet Printing Resolution Study for Multi-Material Rapid Prototyping Reviewed

M. b. Ibrahim,T. Otsubo,H. Narahara,H. Koresawa,H. Suzuki

The 3rd International Conference on Leading Edge Manufacturing in 21st Century   45 - 49   2006.10

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

名古屋   2006.10.19  -  2006.10.20

A Study On Inkjet Drop Deposition To Fabricate Multi-Material 3d Structure Reviewed

M. B.I,T.Otsubo,H. Narahara,H. Koresawa,H. Suzuki

The 12th International Conference on Machine Design and Production (UMTIK 2006)   137 - 149   2006.09

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Turkey   Kusadasi   2006.09  -  2006.09

Investigation on Fabricating 3D Structures Using Inkjet Printing Technology Reviewed

M. B.I.,T.Otsubo,H. Narahara,H. Koresawa,H. Suzuki

The 11th International Conference on Precision Engineering (ICPE),Toward Synthesis of Micro-/Nano-systems   209 - 213   2006.09

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Tokyo   2006.09  -  2006.09

A Study On Using Inkjet Printing Technology To Fabricate Three-Dimensional Structures Reviewed

M. B.Ibrahim,T.Otsubo,H. Narahara,H. Koresawa,H. Suzuki

Proc. of ICOMAST 2006 International Conference on Manufacturing Science and Technology   161 - 164   2006.08

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Malaysia   Melaka   2006.08  -  2006.08

金属光複合加工法を用いた機能性金型のエアベント効果

小島道雄，鈴木裕，楢原弘之，是澤宏之，阿部諭

型技術   21 ( 8 )   106 - 107   2006.06

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

A Study On Fluid Deposition Resolution In Inkjet Printing Of Multi Material Fluid For Rapid Prototyping Application Reviewed

M. b. Ibrahim,T. Otsubo,H. Narahara,H. Koresawa,H. Suzuki

Proceedings Of The International Conference On Recent Advances In Mechanical & Materials Engineering   1105 - 1109   2006.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Malaysia   Kuala Lumpur   2006.05.30  -  2006.05.31

Inkjet Printing Resolution Study for Multi-Material Rapid Prototyping Reviewed

M. b. Ibrahim,T. Otsubo,H. Narahara,H. Koresawa,H. Suzuki

JSME International Journal Series C   49 ( 2 )   353 - 360   2006.04

　More details

Language：English   Publishing type：Research paper (scientific journal)

Integration of silver nanoparticle inkjet printing and layered manufacturing technology Reviewed

Mustaffa B.I.,H.Narahara,H.Koresawa,H.Suzuki

The 7th International Conference Quality in Reseach (QIR) 2004   2004.08

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Indonesia   Depok   2004.08.04  -  2004.08.05

Design of Thermal Environment in Plastic Injection Mold Based on Evaluation of Resin Cooling Uniformity Reviewed

Feng Gao,Akira Oniki,Hiroshi Koresawa,Hiroyuki Narahara,Hrioshi Suzuki

Solid Freeform Fabrication Proceedings   621 - 629   2002.08

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

USA   Austin, TX, USA   2002.08.05  -  2002.08.05

熱集中部にCu-Be合金を用いた射出成形金型の成形性に関する検証実験

鬼木彰，高峰，是澤宏之，楢原弘之，鈴木裕

型技術   17 ( 8 )   44 - 45   2002.07

　More details

Language：Japanese   Publishing type：Research paper (other academic)

プラスチック射出成形金型におけるCu-Be合金インサート材形状の自動生成 Reviewed

高峰,是澤宏之,楢原弘之,鈴木裕

精密工学会誌   68 ( 6 )   777 - 781   2002.06

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Verification Experiment on Cooling Effects of Cu-Be Alloy Inserts in Plastic Injection Molds Reviewed

Feng Gao,Hiroshi Koresawa,Hiroyuki Narahara,Hrioshi Suzuki

Asian Workshop on Polymer Processing in Singapore 2002   22.1 - 22.4   2002.04

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Singapore   Singapore   2002.04.04  -  2002.04.04

異形多数個取りにおける充填効率向上の研究－充填の均一化－

吉田崇志，是澤宏之，楢原弘之，鈴木裕，木下篤，川下英二，金城盛順

型技術   17 ( 13 )   80 - 81   2002.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

Cu-Be合金の入子を用いた射出成形金型における異なる冷却条件による生成性の評価

鬼木彰，高峰，是澤宏之，楢原弘之，鈴木裕

型技術   17 ( 13 )   74 - 75   2002.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

射出成形金型における直管の組合せによる冷却回路の自動配置

徳能竜一,是澤宏之,楢原弘之,鈴木裕

型技術   16 ( 8 )   134 - 135   2001.07

　More details

Language：Japanese   Publishing type：Research paper (other academic)

射出成形金型における長方形高熱伝導材の自動配置

鬼木彰,高峰,是澤宏之,鈴木裕

型技術   16 ( 8 )   132 - 133   2001.07

　More details

Language：Japanese   Publishing type：Research paper (other academic)

金型分割面先端の間隙を低減する金型分割面の自動生成

内田暁和,是澤宏之,楢原弘之,鈴木裕

型技術   16 ( 8 )   76 - 77   2001.07

　More details

Language：Japanese   Publishing type：Research paper (other academic)

3次元ソリッドCAD/CAMシステムに基づく金型製作の効率化に関するアンケート調査

楢原弘之,鈴木裕,是澤宏之

型技術   16 ( 8 )   132 - 133   2001.07

　More details

Language：Japanese   Publishing type：Research paper (other academic)

Automatic Design for Parting Line on Injection Mold Reviewed

Hiroshi KORESAWA,Hiroshi SUZUKI

Technical Papers of 59th Annual Technical Conference (ANTEC 2001)   937 - 941   2001.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

USA   Dallas USA   2001.05.06  -  2001.05.10

Evaluation of Thermal Environment in Plastic Injection Mold Reviewed

Feng Gao,Hiroshi Koresawa,Hiroyuki Narahara,Hiroshi Suzuki

Technical Papers of 59th Annual Technical Conference (ANTEC 2001)   969 - 973   2001.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

USA   Dallas USA   2001.05.06  -  2001.05.10

Automatic Cooling Channels Layout of Straight Cooling Pipes in Injection Molding Reviewed

Hiroshi KORESAWA,Hiroshi SUZUKI

Technical Papers of 58th Annual Technical Conference (ANTEC 2000)   932 - 936   2000.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

USA   Orlando, Florida, USA   2000.05.07  -  2000.05.11

プラスチック射出成形金型における熱環境の評価

高峰,是澤宏之,楢原弘之,鈴木裕

型技術   15 ( 13 )   96 - 97   2000.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

射出成形金型における直線的な冷却管に基づく冷却回路の自動配置

徳能竜一,是澤宏之,楢原弘之,鈴木裕

型技術   15 ( 8 )   58 - 59   2000.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

A Study About Arrangement of Ejector Pins on Product Reviewed

Hiroshi SUZUKI,Yixin SU,Hiroshi KORESAWA,Hiroyuki NARAHARA

Proceedings of 1999 International Conference on Advanced Manufacturing Technology   537 - 541   1999.06

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

China   Xian, China   1999.06.18  -  1999.06.21

Automatic Arrangement of Ejector Pins in Injection Mold Reviewed

Yixin SU,Hiroyuki NARAHARA,Hiroshi KORESAWA,Hiroshi SUZUKI

Proceedings of 1999 International Conference on Advanced Manufacturing Technology   542 - 546   1999.06

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

China   Xian, China   1999.06.18  -  1999.06.21

Cooling of Injection Mold by Using High Thermal Conductivity Material Reviewed

Feng GAO,Hiroshi KORESAWA,Hiroyuki NARAHARA,Hiroshi SUZUKI

Proceedings of 1999 International Conference on Advanced Manufacturing Technology   1196 - 1200   1999.06

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

China   Xian, China   1999.06.18  -  1999.06.21

Autonomous Arrangement of Cooling Channels Layout in Injection Molding Reviewed

Hiroshi KORESAWA,Hiroshi SUZUKI

Technical Papers of 57th Annual Technical Conference (ANTEC '99)   1073 - 1077   1999.05

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

USA   New York, USA   1999.05.02  -  1999.05.06

定常熱伝導解析に基づく射出成形金型の冷却管自動配置設計 Reviewed

是澤宏之，遠近祥史，鈴木裕

日本機械学会論文集(C編)   65 ( 633 )   2087 - 2093   1999.05

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

代表的研究業績

Cu-Be合金を用いた射出成形金型の冷却効果の検討

高峰,是澤宏之,楢原弘之,鈴木裕

型技術   14 ( 7 )   54 - 55   1999.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

遺伝的アルゴリズムを用いた金型分割面形状の自動生成

坂下将人,是澤宏之,楢原弘之,鈴木裕

型技術   14 ( 7 )   56 - 57   1999.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

直線的な冷却管を用いた冷却回路の自動配置

是澤宏之,徳能竜一,鈴木裕

型技術   14 ( 7 )   58 - 59   1999.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

金型の温度解析（熱伝導解析）の仕掛けと応用を学ぼう

是澤　宏之

型技術   14 ( 11 )   58 - 63   1999.04

　More details

Language：Japanese   Publishing type：Research paper (other academic)

Automatic Arrangement of Ejector Pins for Injection Mold by Using Numerical Analysis Reviewed

Yixin Su,Hiroshi Koresawa,Hiroyuki Narahara,Hiroshi Suzuki

Proceedings of 14th International Conference on Computer-Aided Production Engineering   339 - 344   1998.09

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

東京   1998.09.08  -  1998.09.10

高熱伝導材を用いた射出成形金型の冷却に関する研究

高峰,是澤宏之,楢原弘之,鈴木裕

型技術   13 ( 8 )   86 - 87   1998.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

射出成形金型におけるエジェクタピンの自動配置に関する研究

蘇亦芯,是澤宏之,楢原弘之,鈴木裕

型技術   13 ( 8 )   88 - 89   1998.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

高能率金型荒加工システムの開発 Reviewed

是澤宏之，鈴木裕，森崎修

精密工学会誌   63 ( 5 )   711 - 715   1997.05

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

射出成形金型の構造的剛性と成形不良-射出成形金型の金型構造の改善によるバリ生成の低減- Reviewed

是澤宏之，鈴木裕，竹中龍夫，金城盛順

日本機械学会論文集(C編)   63 ( 610 )   2144 - 2150   1997.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Block Removal Method for Rough Cutting with a Multi-Axis CNC Machine Tool Reviewed

Hiroshi Koresawa,Natsuki Yasuhara,Hiroshi Suzuki,Akihiro Hayashi

Technical Papers of NAMRI/SME   175 - 180   1996.04

　More details

Language：English   Publishing type：Research paper (scientific journal)

Computational Analysis of Mold and Deformation during Injection Molding Reviewed

Hiroshi Koresawa,Hiroshi Suzuki,Tastuo Takenaka,Seijun Kinjo

3rd International Conference on Die & Mould Technology Proceedings   725 - 737   1995.09

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

台湾   Taipei   1995.09.07  -  1995.09.08

Development of High-Speed and Accurate CNC System Based on Curved Interpolation Reviewed

Hiroshi Suzuki,Hiroshi Koresawa,Akihiro Hanashi,Shinya Haramaki

2nd JAPAN-FRANCE CONGRESS on MECHATRONICS   2   655 - 658   1994.11

　More details

Language：English   Publishing type：Research paper (international conference proceedings)

Takamatsu   1994.11.01  -  1994.11.03

金型型面実時間加工システムの開発 Reviewed

鈴木裕，是澤宏之，原槙真也，林明朗

日本機械学会論文集(C編)   60 ( 577 )   2900 - 2905   1994.04

　More details

Language：Japanese   Publishing type：Research paper (scientific journal)

Development of the Real Time CAM System Based on Parallel Processing and the Inverse Offest Method Reviewed

Hiroshi Suzuki,Hiroshi Koresawa,Masafumi Sakamoto,Shinya Haramaki

Transactions of NAMRI/SME   21   303 - 309   1993.04

　More details

Language：English   Publishing type：Research paper (scientific journal)