Faculty Profiles - ISHII Kazuo

Papers - ISHII Kazuo

Division display81 - 100 of about 504／ All the affair displays >>

Motion Control of an AUV Based on Disturbance Observer for Tidal Current Estimation Reviewed International journal

Miyakawa R., Nishida Y., Thornton B., Ishii K.

Oceans Conference Record (IEEE) 2023.01

Long-term observation system using a cable-restricted underwater vehicle

TANAKA Yoshiki, NISHIDA Yuya, FUKUDA Jiro, NAKAMURA Masahiro, ISHII Kazuo

The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) ( The Japan Society of Mechanical Engineers ) 2023 ( 0 ) 1P1-C12 2023.01

Authorship：Last author,　Corresponding author Language：Japanese Publishing type：Research paper (conference, symposium, etc.)

To obtain a long-term data of marine resources which are distributed over a wide area of the deep sea, we have been developed a long-term observation system using cable-restricted underwater vehicle. This paper reports about long-term observation system and its wet test performed at 3 m depth. As an evaluation experiment result, the vehicle tethered by a cable was able to cruise with an error of less than 0.34 m against the planned route. The mosaic image generated based on the captured images was able to measure the width, length, and height of the object with an error of less than 4 cm.

DOI： 10.1299/jsmermd.2023.1p1-c12

CiNii Research

Other Link： https://www.jstage.jst.go.jp/article/jsmermd/2023/0/2023_1P1-C12/_pdf

Hovering Type AUV ”Tuna-Sand2” Dive Surveys on Seaweed Bed Habitat off Iwakuni.

MIYAKAWA Ryo, NISHIDA Yuya, ISHII Kazuo

The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) ( The Japan Society of Mechanical Engineers ) 2023 ( 0 ) 1A2-C09 2023.01

Authorship：Last author Language：Japanese Publishing type：Research paper (conference, symposium, etc.)

The oceans occupy about 70% of the Earth ’s surface have vast space and mineral, energy, and biological resources. In recent years, AUV has been developed for resource surveys in various sea areas We are working on developing and implementing a robust control system to improve the AUV autonomy and to navigate safely. This paper reports about observation results by hovelling type AUV ”Tuna-Sand2” on seaweed bed habitat off Iwakuni on January 2023 and estimate currents from the dive data to design the observer to estimate currents and implement for AUV. The dive results show that there were Northwesterly current and AUV position is easily affected by current when change target direction.

DOI： 10.1299/jsmermd.2023.1a2-c09

CiNii Research

Other Link： https://www.jstage.jst.go.jp/article/jsmermd/2023/0/2023_1A2-C09/_pdf

Proposal of Framework for RoboCup Soccer Middle Size League

TOMINAGA Moeko, SHIMOMATSUBAE Kota, TOMINAGA Ayumu, TAKEMURA Yasunori, ISHII Kazuo

The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) ( The Japan Society of Mechanical Engineers ) 2023 ( 0 ) 2A1-B13 2023.01

Authorship：Last author Language：Japanese Publishing type：Research paper (conference, symposium, etc.)

Robot social implementation is expected nowadays, and in particular, for autonomous mobile robots, it is becoming necessary to be able to ”collaborate with others (other robots).” When dealing with such multi-agent systems (MAS), framework sharing has the effect of reducing the burden on designers and improving compatibility and code reuse between agents. In particular, RoboCup is a landmark project that includes the goal of accelerating development and research speed through the sharing of technology and knowledge among teams in competitions. Therefore, in order for engineering applications using MAS to progress to practical stages, a framework that supports the design, implementation, evaluation, and improvement of MAS must be available. This study aims to propose and implement a framework for the RoboCup middle-size league. ROS2 and its network were utilized for implementation, and a proposal including system configuration was made.

DOI： 10.1299/jsmermd.2023.2a1-b13

CiNii Research

Other Link： https://www.jstage.jst.go.jp/article/jsmermd/2023/0/2023_2A1-B13/_pdf

Design of Sphere Transport Mechanism Based on Roller-Sphere Kinematics Properties

Chikushi Shota, Kimura Kenji, Ahn Jonghyun, Ishii Kazuo

The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec) ( The Japan Society of Mechanical Engineers ) 2023 ( 0 ) 1A1-H21 2023.01

Authorship：Last author Language：Japanese Publishing type：Research paper (conference, symposium, etc.)

Efficient transportation of objects by robots is required due to the declining working-age population. This study focuses on sphere transport as a means of efficient object transport by robots. To date, there is no methodology for mechanism design based on kinematics properties for sphere transport by robots. Therefore, we propose a method for designing a sphere transport mechanism based on kinematic properties. The paper presents the requirements and methodology for designing a sphere transport mechanism based on kinematic properties.

DOI： 10.1299/jsmermd.2023.1a1-h21

CiNii Research

Other Link： https://www.jstage.jst.go.jp/article/jsmermd/2023/0/2023_1A1-H21/_pdf

Kinetic Analysis of Omnidirectional Mobile Robot with Symmetry Roller’s Arrangement Reviewed International journal

Kimura Kenji, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 10 ( 3 ) 275 - 281 2023.01

Authorship：Last author Language：English Publishing type：Research paper (international conference proceedings)

In recent years, the efficient mobility of omnidirectional mobile robots is desired in the logistics industry. Hence, various types of rollers are installed in mobile robots. These include omnidirectional rollers, which are characterized with excellent omnidirectional mobility and are considered easy to control. Herein, considering that the side surface of the mechanism is circular, the kinematics of the mechanism assuming an arbitrary arrangement on this circle is derived. Previous research has evaluated the roller arrangement from the perspective of the speed efficiency of the drive roller. Meanwhile, this research focuses on a mobile robot equipped with three omni-rollers. Furthermore, focusing only on the translational speed of the robot, its motion efficiency is evaluated. The distribution of the robot’s translational speed is studied, the area of the region is used as the evaluation function, and its behaviors are analyzed.

DOI： 10.57417/jrnal.10.3_275

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85197268157&origin=inward

Improvement of the Database-Driven PID Control Method by H-Infinity Norm of the Local Model Reviewed International journal

Ueda Takumi, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 10 ( 3 ) 213 - 219 2023.01

Authorship：Last author Language：English Publishing type：Research paper (scientific journal)

PID controllers are used in many applications and are considered an example of a fixed structure controller. For each specific system, the controller's PID parameters must be adjusted accordingly. Therefore, database-driven control, which automatically adjusts PID controller parameters using a large amount of experimental data, is attracting attention. Database-driven control is one of the methods that does not require model information. Therefore, in database-driven PID (DD-PID), the Jacobian of the system used for the steepest descent is unknown. In this paper, we propose an optimization method using gradient descent based on a local model of the system and confirm its effectiveness through simulation using the polystyrene reactor model as an example.

DOI： 10.57417/jrnal.10.3_213

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85197218627&origin=inward

Evaluation of Two Rollers Arrangement on a Hemisphere by Kinetic Energy Reviewed International journal

Kimura Kenji, Yusuke Abematsu, Hiroyasu Hirai, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 9 ( 3 ) 233 - 239 2022.12

Roller's Kinetic Energy Efficency Problem in Upper Hemisphere Reviewed International journal

Kimura K., Ishii K.

2022 Joint 12th International Conference on Soft Computing and Intelligent Systems and 23rd International Symposium on Advanced Intelligent Systems, SCIS and ISIS 2022 1 - 6 6 pages 2022.11

Multibody Modeling of a New Wheel/Track Reconfigurable Locomotion System for a Small Farming Vehicle Reviewed International journal

Grazioso A., di Maria E., Giannoccaro N.I., Ishii K.

Machines 10 ( 12 ) 1117 - 1146 2022.11

Digital Transformation of Feeding Control Knowledge in Marine Aquaculture using Current Sensors Reviewed International journal

Solpico Dominic B., Nishida Yuya, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 9 ( 2 ) 143 - 153 2022.09

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

Improving the efficiency of fish feeding contributes to achieving sustainable expansion of the aquaculture industry. However, expert knowledge on feeding remains reliant on experience. This paper presents a new approach of applying digital transformation (DX) on such knowledge by measuring underwater currents induced by fishes as indicator of their hunger. A prototype sensor suite consisting of current sensors, cameras, and an inertial measurement unit (IMU) was constructed to measure the currents around the fish cage, measure the motion of the suite, and record fish activity, particularly during feeding. An initial experiment was performed in two fish cages during feeding activity. Current measurements were collected and analyzed together with the recorded videos to relate the changes in current to the feeding activities. Results suggest that the currents increase around when feeding was started continuously and decline to zero around when it was stopped. However, more data needs to be collected and analyzed for a better understanding of the relationship between the changes in current and fish activities so it can be used to optimize the feeding decisions of fish farmers.

DOI： 10.57417/jrnal.9.2_143

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85176607340&origin=inward

Efficiency Problem of Spherical Robot in Transfer Kinetic Energy Reviewed International journal

Kimura Kenji, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 9 ( 1 ) 87 - 92 2022.06

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

Previous spherical mobile robots were driven by two rollers with a fixed rotational axis, which restricts the angular velocity vector of the sphere to two dimensions. Three-dimensional freedom is expected to improve the rotational diversity of the sphere. This study proposes a spherical mobile robot with a variable roller-rotational axis that allows the movement of three degrees of freedom. Furthermore, the kinetic energy of transporting the sphere by the rollers is minimized by an optimization procedure and it is shown that the kinetic energy of sphere transport is efficient.

DOI： 10.57417/jrnal.9.1_87

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85146672464&origin=inward

Toward Smart Tomato Greenhouse: The 6th Tomato-Harvesting-Robot Competition and Regulation Changes Aiming at Practical Application Reviewed International journal

Matsuo Takayuki, Takemura Yasunori, Sonoda Takashi, Nishida Yuya, Yasukawa Shinsuke, Ishii Kazuo

Journal of Robotics, Networking and Artificial Life ( ALife Robotics Corporation Ltd. ) 9 ( 1 ) 13 - 19 2022.06

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (scientific journal)

Agriculture is one of the most important primary industries, however the agricultural workforce in Japan has been decreasing due to the aging, shortage of successors and their heavy work. Smart agriculture and farms, which aim to automate farm work, have been attracting attention for the future sustainable society. We have been organizing the Tomato-Harvesting-Robot Competitions since 2014 to introduce robotic technology and AI into agriculture and promote agricultural technology. The competition consists of a Junior League for young students and a Senior League for general competitors. In this paper, we report the results of the 6th Tomato-Harvesting-Robot Competition and the regulation changes toward practical applications.

DOI： 10.57417/jrnal.9.1_13

Scopus

CiNii Research

Other Link： https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85178282719&origin=inward

An Attempt at Underwater Robot Competition which Aimed at Improvement of Learning Motivation Reviewed

AHN Jonghyun, SONODA Takashi, ISHII Kazuo

Journal of JSEE ( Japanese Society for Engineering Education ) 70 ( 2 ) 2_124 - 2_129 2022.04

Authorship：Last author,　Corresponding author Language：Japanese Publishing type：Research paper (scientific journal)

Underwater robot competitions provide students with the opportunity to voluntarily learn engineering knowledge and skills. It is expected that students will be interested in the marine engineering and manufacturing by participating in such underwater robot competitions, and that interest will lead to motivation for university learning. In this study, we will conduct extracurricular activities for 8 students for about half a year with the aim of participating in underwater robot competitions, and evaluate their educational effectiveness. In the evaluation, changes in interest in the marine engineering and manufacturing were evaluated by questionnaire. In addition, changes in learning motivation were evaluated from the university GPA from 2018 to 2020. As a result, it was confirmed that the participating students were interested in the marine engineering and manufacturing through extracurricular activities and maintained high learning motivation.

DOI： 10.4307/jsee.70.2_124

CiNii Research

Other Link： https://www.jstage.jst.go.jp/article/jsee/70/2/70_2_124/_pdf

Underwater Acoustic Positioning Based on MEMS Microphone for a Lightweight Autonomous Underwater Vehicle "Kyubic" Reviewed International journal

Inniyaka Irmiya R., Solpico Dominic B., Hamada Daiki, Sugino Akihiro, Tanaka Rikuto, Nishida Yuya, Ishii Kazuo

Proceedings of International Conference on Artificial Life and Robotics ( ALife Robotics Corporation Ltd. ) 27 349 - 353 2022.01

Authorship：Last author,　Corresponding author Language：English Publishing type：Research paper (international conference proceedings)

2022.01.22 - 2022.01.24

Autonomous Underwater Vehicle positioning is important for accurate control and high-quality data collection. Conventional positioning systems are expensive. This paper describes the design and performance results of control using equations of motion and an inexpensive acoustic positioning system implemented on a lightweight AUV "KYUBIC" for Underwater Robotic competition in Okinawa 2021. The velocity used to estimate the self-position of the AUV is calculated form the equation of motion without integrating the acceleration. The acoustic positioning method is based on Super-short baseline (SSBL) principle. The system design comprises of self-made hydrophone module using MEMS microphone. The estimated distance and angle are integrated for dynamic control of AUV to locate the position of a Pinger.

DOI： 10.5954/icarob.2022.os28-1

Kyutacar

CiNii Article

CiNii Research

Other Link： https://kyutech.repo.nii.ac.jp/records/7484

Autonomous Underwater Vehicle with Vision-based Navigation System for Underwater Robot Competition Reviewed International journal

Kazuki Harada, Riku Fukuda, Yusuke Mizoguchi, Yusuke Yamamoto, Kota Mishima, Yoshiki Tanaka, Yuya Nishida, Kazuo Ishii

Proceedings of 2022 International Conference on Artificial Life and Robotics 27 354 - 359 2022.01

An Estimation Method of Coastal Ocean Debris Using Aerial Drone Reviewed International journal

Kazuo Ishii, Kanako Shirahashi, Yuya Nishida, Moeko Tominaga, Yoshiki Tanaka, Dominic B. Solpico

Proceedings of 2022 International Conference on Artificial Life and Robotics 27 1095 - 1101 2022.01

Motion Control of a Ship Hull Cleaning Robot Reviewed International journal

Hyoga Yamamoto,Yuya Nishida, Takayuki Matsuo, Kazuo Ishii

Proceedings of 2022 International Conference on Artificial Life and Robotics 27 785 - 788 2022.01

Ultrasonic Cleaner using Two Transducers for Ship Hull Cleaning Robot Reviewed International journal

Yuya Nishida, Toshihiro Matsumura, Kazuo Ishii

Proceedings of 2022 International Conference on Artificial Life and Robotics 27 779 - 784 2022.01

Authorship：Corresponding author Language：English Publishing type：Research paper (international conference proceedings)

2022.01.22 - 2022.01.24

Fuel consumption of the ship gets worse by barnacles and stains put on its bottom, so that the ship hull should be cleaned regularly. Usual methods such as cleaning by special divers and cleaning after pulling up to the dock are not used frequently due to those high cost and the heavy burden on cleaners. We proposed a cleaning method using underwater vehicle with brushes, however there is a possibility to remove paints on the hull. To improve cleaning performance of the underwater vehicle, the ultrasonic cleaner is developed by using cavitation occurred by sound waves of the acoustic transduces. The cleaner generates sound waves with sound pressure of 0.2MPa or more required to occur cavitation at the point where sound waves from two transducers overlap. In experimental results, the cleaner occurred cavitation enough to make two holes in the aluminum foil located 50mm away from transducers.

DOI： 10.5954/icarob.2022.os29-4

Underwater Acoustic Communication using QPSK Modulation Method Reviewed International journal

Yuya Nishida, Yuichiro Uemura, Rikuto Tanaka, Kazuo Ishii

Proceedings of 2022 International Conference on Artificial Life and Robotics 27 774 - 778 2022.01

　 PREV - NEXT 　

<ISHII Kazuo>

Papers - ISHII Kazuo